ESP32 Desktop Assistant

The ESP32 Desktop Assistant
uses the ESP32-S2 module as the main controller.
The programming mode is a serial port automatic switching programming circuit.
There are three buttons:
Button 1, manually turn the LED on/off
; Button 2, manually restart the MCU;
Button 3, pending.
After powering on, it connects via the ESP32-S2's Wi-Fi peripheral.
Once connected, it uses a WiFi Client to connect to the weather website host and sends a request to acquire weather data.
The weather data is parsed and displayed on a 2.4-inch TFT color screen.
The time is refreshed every 30 seconds, and the weather data is refreshed every 10 minutes.
Data exchange with the ESP32-S2 main controller can be achieved via a network on a mobile phone or computer, enabling control.
 
Physical demonstration link:
[ESP32 Desktop Assistant] This project is open source on the JLCPCB Open Source Hardware Platform_Bilibili_bilibili