The TC78B016FTG are three phased sine wave PWM drivers for brushless motors. It controls the motor to change the speed by changing the PWM duty cycle, based on the speed control Hall signal is supported to three sensors.
TC78B015 AFTG is a 150 t trapezoidal chopper type PWM driver for three-phase brushless motors. It controls the speed of the motor by changing the PWM duty cycle based on the speed control input. One sensor of TC78B015 AFTG supports Hall signal
TC78B015FTG is a 150t trapezoidal chopper type PWM driver for three-phase brushless motors. It controls the speed of the motor by changing the PWM duty cycle based on the speed control input. One sensor of TC78B015 FTG supports Hall signal
TB67Z800FTG integrates a 3-channel half-bridge driver. It can control all channels independently.
TB67Z800FTG integrates a 3-channel half-bridge driver. It can control all channels independently.
TB67B000HG is a three-phase sine wave PWM driver for brushless motorcycles. The high TB67B000HG has a voltage IC of 500 V. TB67B000HG has a 2-in-1 (MCP) controller structure (sine wave PWM/wide-angle conduction) and high-voltage driver. The speed of the brushless DC motor can be directly controlled by the speed control signal (analog) of the microcomputer.
TB67B008 is a three-phase PWM chopper driver for sensorless brushless motors. It controls the speed of the motor by changing the PWM duty cycle based on the speed control input. WQFN24 and SSOP24 packages can be selected. Four function modes are available. TB67B008 is a similar product that miniaturizes and reduces functionality of TB67B001.
TC78B041FNG and TC78B042FTG are specially developed for three-phase brushless DC fan motors. TC78B041FNG is packaged in SSOP30 type. TC78B042FTG adopts QFN32 package and adds RESX and VREF2 pins.
TC78B041FNG and TC78B042FTG are specially developed for three-phase brushless DC fan motors. TC78B041FNG is packaged in SSOP30 type. TC78B042FTG adopts QFN32 package and adds RESX and VREF2 pins.
TB67B000AFG is a high voltage PWM brushless DC motor driver. This product integrates a controller supporting sine wave PWM drive and wide-angle commutation and a high-voltage driver in a single package ("two-in-one", or MCP). It directly changes the speed of a brushless DC motor by using a speed control analog signal from a microcontroller.
TB67B000AFG is a high voltage PWM brushless DC motor driver. This product integrates a controller supporting sine wave PWM drive and wide-angle commutation and a high-voltage driver in a single package ("two-in-one", or MCP). It directly changes the speed of a brushless DC motor by using a speed control analog signal from a microcontroller.
TC78B027FTG is a 1 Hall sine wave PWM controller for 3-phase brushless DC motors. N-ch MOSFET can be used as external FET. Non-volatile memory (NVM) and enclosed loop speed control capabilities are built in. Cost can be suppressed without the use of a microcontroller.
TC78B009FTG is a three-phase PWM chopper predriver for sensorless brushless motors. Motor speed can be controlled by selecting between PWM duty cycle, analog voltage and I2C. Non-Volatile Memory (NVM) has been implemented and can be configured to operate according to the motor and usage instructions. It also implements closed loop speed control functionality without the need for an external microcomputer. The TC78B009FTG is used with six external MOSFET inverters to drive sensorless brushless motors with a wide output range.
TC35894FG is an IO expander LSI with I2C bus master interface slave, PWM/timer control, GPIO control, and key matrix control. These functions are set and selected by software in the TC35894FG register.
TC35894XBG is an IO expander LSI with slave host interface for I2C bus, PWM/timer control, GPIO control and key matrix control. These functions are set and selected on the TC35894XBG via software registration.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
