Evaluation Kit - 33905D3, 2nd Generation SBC with CAN and LIN

Schematic PCB

MC68HC908JW32 Evaluation Kit Hardware/Software Example

The KITUSBSPIEVME evaluation kit is an available hardware/software example that allows users to become familiar with the MC68HC908JW32 through practical applications, USB to SPI and USB to parallel converters. The main function of this demo board is to support a PC without a parallel port, which can communicate with other NXP evaluation boards through the USB port. USB ports are a standard feature on almost every new PC. The kit utilizes the MC68HC908JW32's built-in USB, SPI and parallel ports.

Schematic PCB

CAN/LIN communication expansion board

DEVKIT-COMM is a hardware plug-in adapter board that supports 4 additional CAN and 6 additional LIN/SCI connections when plugged into an existing development kit

Schematic PCB

PTN5150A-PTN36043 USB Type-C CC Logic Evaluation Kit

Schematic PCB

PTN5110 Type-C Demonstration Kit

Schematic PCB

Automotive Ethernet 100BASE-T1 PHY Customer Evaluation Board

Schematic PCB

MC33664ATL Isolated Network High Speed ​​Transceiver Evaluation Board

Schematic PCB

2-Channel Converter Evaluation Board

Schematic PCB

CAN SIC Evaluation Board

Schematic PCB

SJA1110 100Base-T1 Multi-Gigabit Ethernet Switch Example Board

Schematic PCB

PCAL6524EV 24-Bit General IO Arduino ^® Shield

Schematic PCB

Arduino ^® Shield expansion board

Schematic PCB

PCAL6534EV 34-bit general-purpose IO Arduino ^® Shield expansion board

Schematic PCB

Tigard: an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H

Tigard is an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H. By combining commonly used pins, labeled harnesses, onboard level translation, and logic analyzer connections, it is specifically designed to connect to and communicate with low-speed interfaces on reverse-engineered hardware targets.

Schematic PCB

CANFDuino: The best platform for open source, CAN-bus Arduino projects

CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.

Schematic PCB

pmod-sd-dummy: virtual SD card connected to the host system via SDIO

​This design has a PMOD for the SD card to emulate the SD card to the host system.

Schematic PCB

pmod-quad-7segment: PMOD of four 7-segment digital tubes

A PMOD with a quad 7-segment display connected to a pair of 74hc595 shift registers. There are 3 tactile buttons.

Schematic PCB

TIDA-00333: Dual isolation, half-duplex RS485 repeater reference design, with built-in transceiver control

Suitable for long distance RS-485 networks. The design provides transient protection from the effects of ESD, EFT and surge transients as specified in the IEC 61000 transient immunity standard.

Schematic PCB

MAXREFDES1247: Tiny 12W DC-DC flyback converter using MAX17596

The MAXREFDES1247 is a miniature, 12V output, isolated power supply that can deliver up to 1A of load current.

Schematic PCB

Production Line Tool launched by Dialog

The software part of this tool (including the host computer) is not open source, but the schematic diagram and PCB related files are.

Schematic PCB