This document describes the Telegesis ETRX2-PA ZigBee module, which is designed to be integrated into another device and provide a fast, simple and low-cost wireless mesh network interface. Unless explicitly stated, the content also applies to ETRX2HR-PA modules that use a Hirose U.FL coaxial antenna connector in place of the onboard ceramic antenna. Users cannot convert ETRX2-PA to ETRX2HR-PA or vice versa. The Telegesis ETRX2-PA module is based on the Ember ZigBee platform, which consists of the single-chip EM250 and the EmberZNet mesh stack compliant with the ZigBee PRO standard. Integrating the simple-to-use AT style command interface and advanced hardware design, a wide range of applications can be easily implemented. Configurable functionality often allows the use of the ETRX2-PA wireless mesh module without the need for an additional host microcontroller, saving even more integration time and cost. In addition to the Telegesis AT command set, the ETRX2-PA can be used with custom built firmware or the Ember EZSP based UART protocol interface... No RF experience or expertise is required to add this powerful wireless networking capability to our of products. ETRX2-PA offers fast integration opportunities and the shortest possible time for marketing your products.
BT121 is a Bluetooth dual-mode module suitable for applications requiring Bluetooth LE and BR/EDR connections. It can connect to older devices that only support Bluetooth SPP or Apple® iAP2 profiles as well as devices that support Bluetooth LE. The BT121 integrates a high-performance Bluetooth radio, a low-power ARM Cortex microcontroller and Bluegiga Bluetooth dual-mode stack software, requiring no RF or Bluetooth software development, making it very easy to use. The BT121 can be used as a modem with a separate host MCU, but applications can also be embedded into the built-in ARM® Cortex® MCU with the Bluegiga BGScriptTM scripting language.
BLE113 is a Bluetooth smart module targeting small, low-power sensors and accessories. It integrates all the functionality required for Bluetooth Smart applications, including Bluetooth radio, software stack and GATT-based profiles. The BLE113 Bluetooth Smart module can also host end-user applications, meaning no external microcontroller is required in devices with size or price constraints. The module features flexible hardware interfaces to connect different peripherals and sensors, and can be powered directly from a standard 3V coin cell or a pair of AAA batteries. In its lowest power sleep mode, it consumes only 500 nA and will wake up in a few hundred microseconds.
The WF121 Development Kit provides the right environment for developing and prototyping embedded Wi-Fi® applications using the WF121 Wi-Fi module. The development kit contains a ready-to-use hardware platform and a Wi-Fi software development kit that includes all necessary documentation and PC tools.
The reference design demonstrates a complete 2.4GHz ZigBee IEEE 802.15.4 based compliant radio transceiver solutions and conform to FCC CFR47 part 15. The wireless SoC reference design series (RFMDs RF6505/6575/6555) are developed by the partnership between RFMD and Corporation. The RFMD device increases transmit power and sensitivity.
OM6716 is a transponder evaluation and development tool for HITAG transponders and used with the 434 MHz UHF band RF expansion board for RKE/PKE applications.
NHS3100UCODEADK
Highly scalable QN9020 application development platform
The NFC Cube kit is a set of tools to demonstrate Near Field Communication (NFC) and the variety of use cases enabled by NXP’s NFC solution, and what are the use cases that are offered by this standard and by the NXP products.
FRDM-KW24D512 is a development platform for KW24D512 Kinetis ® W MCU, supporting Bluetooth Low Energy and EEE 802.15.4.
The Elatec TWN4 MultiTech Nano is an ultra-small (31 x 17.8 x 2.5mm / 1.22 x 0.7 x 0.12 inches) RFID/NFC module suitable for space-constrained machines such as handheld card readers, tablets, monitors, terminals and EMVCo POS machine system.
PN7120 development kit for RaspberryPi, BeagleBone Black and boards with Arduino interface, including: LPCXpresso, Kinetis Freedom and i.MX boards.
PEGODA contactless smart card reader based on MFRC523
NXP FRDM-KW019032 is a development board for the MKW01Z128CHN platform and a member of the Kinetis ® W series MCUs in the SubGHz ISM band.
PN7150 development kit for RaspberryPi, BeagleBone Black and boards with Arduino interface, including: LPCXpresso, Kinetis Freedom and i.MX boards.
Flexible, easy-to-use front-end development kit. It contains the PNEV5180B circuit board for EMVCo applications, antennas, NFC sample cards, etc.
The NXP MRB-KW0x is a modular reference board for MKW01Z128CHN platform, part of the Kinetis W series of MCUs.
EXPLORE-NFC - exclusively supplied by element14
The add-on kit for the NTAG I²C+ Explorer Kit (Interconnected NFC Tag) contains Category 4, Category 5 and Category 6 Flex antennas.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
