Introduction: This is the adapter board between stm32 and w5100s modules
Introduction: Use the Hongmeng Hi3861 chip combined with the servo to realize intelligent WIFI remote control of physical switches in homes or dormitories.
Introduction: Not yet verified_32u4 main control, qmk firmware, hot-swappable
Introduction: A 20-key keypad made on the basis of the old lettuce-eating numeric keypad on the sketchpad. Three common keys, tab, calculator, and backspace, are added to the top row. It has RGB and full-key hot swapping. , the firmware is written by Brother Lettuce
Introduction: Main control: stm32f401cccu6 Screen: 0.96-inch st7735 Test: ina226 Type-C male and female splint 0.8mm or 1.0mm thickness is acceptable. When ldo is 20V, it can generate heat of more than 70 degrees!
Introduction: Homemade Arduino Nano minimum system test board!
Introduction: ArmorM, an alternative hit detection device suitable for RoboMaster referee systems AM02 and AM12. GitHub: https://github.com/Q1anWan/Armors
Introduction: Project Title: Design of Intelligent Monitoring System for Electrical Equipment
Introduction: Adapted from the open source project: https://www.oshwhub.com/TheLight/zi-ding-yi-jian-pan Thanks to the boss of TheLight for the open source project.
Introduction: This design is an infrared optical communication device that transmits mixed signals. It is mainly composed of four parts: signal acquisition module, infrared transmitting module, infrared relay module, and infrared receiving module. It can realize simultaneous transmission of voice signals and the ambient temperature of the transmitter. The maximum transmission distance is up to 5m without obvious distortion.
Introduction: A 51 minimum system for association members. The plan has been verified and can be modified by yourself.
Introduction: Third Prize in the 2022 Guangzhou City Polytechnic School of Electrical Engineering Electrical and Electronic Breathing Lamp Design Competition
Introduction: F1C200s, ESP32 dual-core processing, twelve-legged robot
Introduction: A burner for typec interface of 51 microcontroller burning program
Introduction: I have modified two versions using the open source DAP-Link. Please select the information for reference only. The specific information shall be subject to the open source files. I am a newbie. If you don’t like it, please don’t criticize me. Please bear with me if there are any deficiencies.