To meet the increasing demands for isolated Power over Ethernet (PoE) power solutions, Maxim’s power supply experts have developed innovative, isolated, PoE, powered device (PD) power solutions. These isolated PoE power solutions efficiently convert high voltage PoE power into 5V and 12V outputs, respectively. Each design was tested for load and line regulation, as well as efficiency and transient performance. These boards feature a module architecture, with through-hole pins for immediate board placement and accelerated prototyping.
The evaluation board supports the MC33810EK automotive engine control IC for injectors, solenoids, lights, and relays.
The long strings of LEDs commonly found in TV and display backlighting, street lights, and parking garage lights require a current driver capable of producing high voltages. This reference design provides such a driver using the MAX16834, and demonstrates how very-high dimming ratios can be obtained.
Supercapacitors are increasingly being used in a number of applications in electric vehicles, transportation equipment, industrial machinery and utility grids. In the MAXREFDES1215, a supercapacitor-based energy harvester is demonstrated using the MAX17220. The circuit uses a supercapacitor to provide backup energy. The first stage of the circuit charges a supercapacitor, and the second stage of the circuit regulates the voltage from the supercapacitor to supply various sensors with a steady output voltage. In this system, the MAX17220 is used for regulating the output voltage from the supercapacitor.
This application note describes a backlight LCD application in which two adjacent CCFL lamps share a common, low-voltage side lamp connection. This design is found in automotive, industrial, and avionic applications. The article describes how a DS3882 CCFL controller can be used to drive the two CCFL lamps that share a common return.
IIS2MDC adapter board for standard DIL24 socket
The MAXREFDES1123 is a compact boost power-supply design for high-voltage applications with low current requirements where extremely low cost and small size are top priorities.
L3GD20 adapter board for standard DIL24 sockets
Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications. However, the use of an optocoupler or an auxiliary winding on the flyback transformer for voltage feedback across the isolation barrier increases the number of components and design complexity. The MAX17690 eliminates the need for an optocoupler or auxiliary transformer winding and achieves ±5% output voltage regulation over line, load, and temperature variations.
The PMP5242 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 22W LED load. This supply can operate from an input ranging from 85VAC up to 265VAC. It is capable of driving LED strings from 156V up to 208V at a fixed current of 110mA with efficiency over 89%.
The TIDA-00786 is a small size brushed DC motor controller with fixed 100% duty cycle speed input and variable current regulation. The DRV8871's integrated current sensing capability enables the design to utilize standard potentiometers, allowing the user to quickly change current limit levels in motors powered by 12 to 24V inputs.
The KITPF3000FRDMPGM Programming Board is an easy-to-use circuit board that allows the user to program the PF3000 power management IC. This programming board integrates the popular KL25Z Freedom circuit board. The Freedom circuit board serves as the interface between the GUI and the PF3000. The analog-to-digital converter (ADC) in the KL25Z Freedom board monitors the regulator's voltage via the GUI.
The MAXREFDES1181 is centered around the MAX17501 ultra small, high-efficiency, high-voltage, synchronous stepdown DC-DC converter with integrated MOSFETs.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.
This document details the MAXREFDES113# subsystem reference design, a 17V to 36V input, 12V output, flyback isolated power supply capable of 20W. Design files and test results are included. Hardware is available for purchase.
The MAXREFDES1227 is a miniature 12V output isolated power supply that can deliver up to 2A load current. The design employs the MAX17596 peak-current-mode controller in discontinuous-conduction mode (DCM) flyback topology running at 125kHz. The input voltage range of MAX17596 is 4.5V to 36V; however, an extra bias winding from the transformer is used to power the controller. This allows an input operating voltage of up to 60V for this design.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
