The MAX17506 is a high-efficiency switching regulator that delivers up to 5A load current at output voltages from 0.9V to (0.9 x VIN). The device integrates the highside MOSFET and operates over 4.5V to 60V, making it ideal for on-board point-of load and post-regulation applications.
This is a 35W 19.0V/1.84A USB adapter reference design using quasi-resonant PWM integrated circuit ICE2QS03G, CoolMOS™ IPD60R600P6 (DPAK), 2 small signal low voltage MOSFETs 2N7002 and high-speed switching diode BAS21-03W in a short brick shape , peak power is 45W, lasting 2 milliseconds.
This reference design is a dual string LED driver that implements an operational amplifier based circuit which balances the current in two LED rings. The operational amplifier circuit senses current in a reference string and uses feedback from a mirrored string to bias a MOSFET that egulates the current between the strings. The design uses the TPS92692-Q1 multi-topology LED driver in a boost configuration to drive the LEDs. The TPS92692-Q1 features spread spectrum frequency modulation for EMI performance, analog current adjustment and internal PWM dimming. This design includes adjustable linear thermal foldback using the LMT87-Q1 analog temperature sensor, as well as current limiting, in the event the mirrored string fails open circuit. The design also features two brightness modes. One mode is a full brightness mode ('DRL') and the other is a PWM dimming mode ('Position') which reduces brightness.
This reference design is for a highly efficient, flyback, 12V, Class 3 powered device (PD). The design features the MAX5969B as its controller. The design also uses the MAX5974A, which controls current-mode PWM converters and provides frequency foldback for PoE applications. Using these devices, this reference design is IEEE® 802.3af/at compliant and is a high-performance, compact, and cost efficient solution for a Class 3 PD. The design can also be customized to 12V/2A Class 4 PD.
LIS331HH adapter board for standard DIL24 socket
The MAXREDES1126 provides the internal core voltage (VCCINT) for Xilinx Ultrascale+ FPGAs.
The MAX16813 is a highly efficient, high-brightness (HB) LED driver that provides four integrated LED current-sink channels. An integrated current-mode switching controller drives a DC-DC converter that provides the necessary voltage to multiple strings of HB LEDs.
The portable 3D scanning reference design uses Texas Instruments' DLP software development kit (SDK) , allowing developers to easily build by integrating TI's digital micromirror device (DMD) technology with cameras, sensors, motors or other peripherals Detailed 3D point cloud. Ideal as a compact or handheld solution, this high-resolution 3D scanner system utilizes the DLP® LightCrafter™ Evaluation Module (EVM) featuring the DLP3000 WVGA DMD to ensure flexible control of structured lighting solutions in industrial applications precise graphics.
The MAX17509 integrates two internal switch step-down regulators with programmable features. The device can be configured as two single-phase independent power supplies or as a dual-phase, single-output power supply. The device operates from 4.5V to 16V input and generates independently adjustable output voltage in the ranges of 0.904V to 3.782V and 4.756V to 5.048V, with ±2% system accuracy. The MAX17509 provides maximum flexibility to end-users by allowing them to choose multiple programmable options by connecting resistors to the configuration pins. Two key highlights of the device are the self-configured compensation for any output voltage and the ability to program the slew rate of LX switching nodes to mitigate noise concerns. Noise-sensitive applications, such as high-speed multigigabit transceivers in FPGAs, RF, and audio, benefit from this unique slew-rate control. SYNC input is provided for synchronized operation of multiple devices with system clocks.
The MAX17681/MAX17681A is a high-voltage, highefficiency, iso-buck DC-DC converter designed to provide isolated power up to 5W.
The Freedom KL25Z is MCU hardware for connecting a PC with SPIGen software to the SPI programmable registers of the GD3100 device on the FRDM-GD3100EVB
As LEDs are becoming more and more popular, so is the need for small, cost-effective solutions. The MAXREFDES1080 is a constant-current, high-brightness LED (HB LED) driver. It delivers 5W of power to a single LED string, which is included in the design. The circuit is in a step-down configuration and is designed for a 12V input.
The MAXREFDES1050 is a positive input, negative output power supply that delivers up to 1.5A at -15V from a 18V to 30V supply voltage. It is designed for industrial control equipment that uses analog components like amplifiers and multiplexers that operate on negative supply voltage.
The MAX5073 is a dual converter capable of operating as a buck or boost converter. As a dual buck converter, this device can deliver up to 2A and 1A of output current. The reference design focuses on the MAX5073 operating as a buck converter with a switching frequency of 2MHz, which allows the use of smaller passive components and keeps it out of the AM band for automotive applications.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
