PEGODA contactless smart card reader based on MFRC523

PEGODA contactless smart card reader based on MFRC523

Schematic PCB

OM5578: Development kit for the PN7150 plug-and-play NFC controller

PN7150 development kit for RaspberryPi, BeagleBone Black and boards with Arduino interface, including: LPCXpresso, Kinetis Freedom and i.MX boards.

Schematic PCB

OM25180FDK: PN5180 NFC front-end development kit for POS terminal applications

Flexible, easy-to-use front-end development kit. It contains the PNEV5180B circuit board for EMVCo applications, antennas, NFC sample cards, etc.

PNEV512R: EXPLORE-NFC - Exclusively supplied by element14

EXPLORE-NFC - exclusively supplied by element14

NTAGI²C Plus Flex Kit, includes additional Flex Antenna

The add-on kit for the NTAG I²C+ Explorer Kit (Interconnected NFC Tag) contains Category 4, Category 5 and Category 6 Flex antennas.

Schematic PCB

NTAG I ² C + Explorer Kit with NFC Reader

The NTAG I²C+ Explorer Kit is an all-in-one demonstration/development resource for NFC connected tags. Additional NFC readers included.

Schematic PCB

PNEV512B: PN512 card reader circuit board

PN512 card reader circuit board

Schematic PCB

OM23221ARD: NTAG ^I2C + Kit for ^Arduino® Pinout

NXP's NTAG I²C+ kit works with any Arduino header-compatible board, including LPCXpresso, Kinetis and i.MX boards. The purpose of this kit is to simulate the use of NTAG I2C tag chips in embedded electronic systems.

NHS3152THADADK: NHS3152 Treatment Adherence Starter Kit

The kit allows evaluation of the NHS3152 chip for treatment compliance and rapid start of development of specific use cases.

OM26630FDK: CLRC663 + NFC front-end development kit for access management applications

Schematic PCB

NHS3152TEMOADK: NHS3152 Universal Starter Kit

This kit permits to evaluate the NHS3152 chip and to start the development of a specific use case.

NHS3100TEMOADK: NHS3100 starter kit for temperature monitoring

This kit allows evaluation of the NHS3100 chip to monitor temperature and start the development of specific use cases. Firmware developed based on this starter kit is fully reusable in the final product, speeding time to market for temperature monitoring products.

NHS3100THADADK: NHS3100 Starter Kit for Treatment Adherence

The kit allows evaluation of the NHS3100 chip for treatment compliance and the start of development of specific use cases. This starter kit develops firmware that is fully reusable in the final product form factor, accelerating time to market for treatment-adherence products.

CLEV6630A: MFRC630 and SLRC610 NFC front-end development board

CLEV6630A

CLRC663 + and QN902x NFC-Bluetooth ^® Low Energy Solutions for Consumer Electronics Applications

Bluetooth ^® Low Energy-NFC-v2.0 is an NFC expansion board for QN9020DK and an extensible QN9020 application development platform. This NFC expansion board is based on CLRC663+, a high-performance multi-protocol NFC front-end.

DEVKIT-COMM: Development board adapter for CAN/LIN communication expansion

DEVKIT-COMM is a hardware plug-in adapter board that supports up to 4 additional CAN and 6 additional LIN/SCI connections when plugged into the MCU DEVKIT:

Schematic PCB

OM6270: SPI/I ² C to UART Bridge Demonstration Board (SC16IS750)

OM6270 is a demonstration board for SC16IS750. SC16IS740/750/760 is a slave I ² C bus/SPI interface that connects to a single-channel high-performance UART .

KIT33903BD3EVBE: Evaluation Kit - MC33903BD3, 2nd Generation SBC with CAN and LIN

You can use this evaluation board to implement the functionality of the MC33903D3 system basis chip (SBC).

SJA1124EVB: Evaluation board for the SJA1124 SPI to Quad-LIN bridge

The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.

Schematic PCB

OM13790 Host and Dock: USB Type-C Shield Board Gen 2 with DisplayPort Alt Mode

NXP is launching a Generation 2 USB Type-C Shield with display port alt mode support! The NXP Generation 2 USB Type-C shield works with the MCUXpresso SDK and USB Power Delivery stack to allow you to connect USB Type-C Connectors to select Kinetis®, LPC and i.MX RT development platforms.

Schematic PCB