This document details the Riverside (MAXREFDES8#) subsystem reference design, a 3.3V input, 12V (15V) output isolated power supply. The Riverside reference design includes a 3W primary-side transformer H-bridge driver for isolated supplies, and one wide input range and adjustable output low dropout (LDO) linear regulator. Test results and hardware files are included.
This document explains how the Corona (MAXREFDES12#) subsystem reference design provides a compact and simple isolated digital input interface for industrial control and automation applications. Hardware and firmware design files are provided.
Maxim's Santa Cruz (MAXREFDES23#) reference design is the world's smallest IO-Link® light sensor compliant with IEC 61131-9. The Santa Cruz has six different types of sensors: ambient light (clear), red, green, blue, infrared, and is also a temperature sensor. The entire design fits onto a 6.5mm x 25mm printed circuit board (PCB).
The MAXREFDES62# reference design ushers in the era of Industry 4.0. With dual RS-485 communication channels for the next generation of ultra-small programmable logic controllers, this design meets the data rate and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features one half-duplex RS-485 transceiver, one full-duplex RS-485 transceiver, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as results of lab measurements are provided.
The MAXREFDES63# reference design ushers in the era of Industry 4.0. This design meets the higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features eight channels of digital outputs and a complete, efficient power-supply system. Hardware and firmware design files are provided.
The MAXREFDES64# reference design ushers in the era of Industry 4.0. This design meets the higher voltage needs of industrial control and industrial automation applications while consuming minimal power and space. This high-performance system features eight channels of digital inputs and a complete, efficient power-supply system. Hardware and firmware design files are provided.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
Maxim Integrated's MAXREFDES37# reference design is a fully IO-Link ver1.1 compliant, four-channel servo driver using a TMG TE IO-Link device stack. The system contains an IO-Link device transceiver, a low-power RL78 processor, and efficient industrial step-down DC-DC converter. The MAXREFDES37# comes preprogrammed and ready to connect with any compliant IO-Link master such as the MAXREFDES79# IO-Link master with a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, and IODD firmware files are available for download.
The MAXREFDES43# subsystem provides an I2C-based reference design for securing Xilinx FPGAs to protect IP and prevent attached peripheral counterfeiting. The system implements an I2C SHA-256 challenge-response between the FPGA and a DS28C22 secure authenticator with on-board memory. Boards for purchase, hardware, and firmware design files provide complete system information for rapid prototyping and development.
The MAXREFDES44# subsystem provides a 1-Wire-based reference design for securing a Xilinx system-on-chip (SoC) to protect IP and prevent attached peripheral counterfeiting. The system implements a Public/Private Key 1-Wire ECDSA challenge-response between the SoC and a DS28E35 secure authenticator with on board memory. Boards for purchase, hardware, and firmware design files provide complete system information for rapid prototyping and development.
The MAXREFDES1158 is a 5V supplied, 2.75kVRMS isolated, 500kbps, RS-485 module using the MAX14946. This reference design demonstrates how to build an isolated RS-485 module with a low-cost transformer to provide isolated power.
The MAXREFDES1160 is a 5V supplied, 2.75kVRMS, full-duplex and 500kbps isolated RS-485 module using the MAX14853. This reference design demonstrates how to build an isolated RS-485 module with a low-cost transformer to provide isolated power. A transformer from HanRun, the HR600755, is used in this design. The power supply on the reference design is derived from a single 5V source. Connect the design board to a USB port or connect an external supply from VDDA to GNDA to provide 5V power supply on the logic side (A). The integrated push-pull transformer driver and external transformer (TX1) generate an isolated supply for powering the isolated side (B) of the board.
The MAXREFDES174# is an IO-Link®-compliant, distance sensor reference design that uses the Maxim MAX22513 IO-Link device transceiver and supports the IQ2 Development IO-Link stack.
The MAXREFDES173# IO-Link® temperature sensor uses the MAX14827A IO-Link device transceiver and supports the IQ2 Development™ IO-Link stack.
The MAXREFDES145# is a fully IO-Link®-compliant, 8-port IO-Link master reference design. This design uses TEConcept's IO-Link master stack and is both an IO-Link master reference design as well as an IO-Link sensor /actuator development and test system. Eight IO-Link ports allow for simultaneous testing of up to eight different sensors (or actuators).
OM6716 is a transponder evaluation and development tool for HITAG transponders and used with the 434 MHz UHF band RF expansion board for RKE/PKE applications.
NHS3100UCODEADK
The NFC Cube kit is a set of tools to demonstrate Near Field Communication (NFC) and the variety of use cases enabled by NXP’s NFC solution, and what are the use cases that are offered by this standard and by the NXP products.
The Elatec TWN4 MultiTech Nano is an ultra-small (31 x 17.8 x 2.5mm / 1.22 x 0.7 x 0.12 inches) RFID/NFC module suitable for space-constrained machines such as handheld card readers, tablets, monitors, terminals and EMVCo POS machine system.
PN7120 development kit for RaspberryPi, BeagleBone Black and boards with Arduino interface, including: LPCXpresso, Kinetis Freedom and i.MX boards.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
