STM32 Nucleo runs MEMS and environmental sensor expansion board
Dual channel IO-Link device expansion board based on L6364Q for STM32 Nucleo
ZigBee Contact Sensor Reference Design with EM3587, Si7053 and PCB Antenna
Maxim's Santa Cruz (MAXREFDES23#) reference design is the world's smallest IO-Link® light sensor compliant with IEC 61131-9. The Santa Cruz has six different types of sensors: ambient light (clear), red, green, blue, infrared, and is also a temperature sensor. The entire design fits onto a 6.5mm x 25mm printed circuit board (PCB).
Maxim Integrated's MAXREFDES42# reference design is a low-power, IO-Link RTD temperature sensor compliant with IEC 61131-9. The system contains an RTD-to-digital converter, an IO-Link transceiver, an efficient step-down converter, and a display. The MAXREFDES42# comes preprogrammed and ready to connect with a version 1.1-compliant IO-Link master. Design files including the schematic, PCB, BOM, and firmware source code are available for download.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
Maxim Integrated's MAXREFDES37# reference design is a fully IO-Link ver1.1 compliant, four-channel servo driver using a TMG TE IO-Link device stack. The system contains an IO-Link device transceiver, a low-power RL78 processor, and efficient industrial step-down DC-DC converter. The MAXREFDES37# comes preprogrammed and ready to connect with any compliant IO-Link master such as the MAXREFDES79# IO-Link master with a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, and IODD firmware files are available for download.
The MAXREFDES43# subsystem provides an I2C-based reference design for securing Xilinx FPGAs to protect IP and prevent attached peripheral counterfeiting. The system implements an I2C SHA-256 challenge-response between the FPGA and a DS28C22 secure authenticator with on-board memory. Boards for purchase, hardware, and firmware design files provide complete system information for rapid prototyping and development.
The MAXREFDES82# reference design is an industrial, smart force sensor. Four load cells mounted on a quadrant plane are channeled to a multi-channel 24-bit ADC and the conversion results are computed to indicate the force magnitude, position and movement on a flat cover.
MAXREFDES99# is an Arduino form factor compatible shield for the rapid development of LED displays using the MAX7219 LED display driver.
This document details the MAXREFDES98# subsystem reference design, a 36V to 57V input, 5V output, step down, non-isolated power supply capable of 12.5W. Design files and test results are included. Hardware is available for purchase.
This document details the MAXREFDES108# subsystem reference design, a 36V to 57V input, 12V output, step down non-isolated power supply capable of 12W. Design files and test results are included. Hardware is available for purchase.
The MAXREFDES117# reference design is a photoplethysmogram (PPG-optical) based heart-rate and SpO2 sensor. mbed and Arduino firmware and hardware design files as well as lab measurements are provided. Boards are available for purchase.
The MAXREFDES171# is a complete, high-accuracy, IO-Link distance sensor reference design that provides accurate ranging up to 4m. Built in an industrial form factor, the design makes use of a commercially available time-of-flight (ToF), laser-ranging sensor.
The MAXREFDES164# IO-Link® temp sensor reference design uses the MAX14828 IO-Link device transceiver and supports the TMG TE IO-Link or TEConcept IO-Link stack.
The MAXREFDES1161# is a small form factor, high accuracy, 2-wire 4mA to 20mA transmitter which integrates all functional and protection blocks in a small 1.0in x 0.6in dual-row header footprint that is compatible with breadboards and off-the-shelf peripheral expansion boards.
The MAXREFDES174# is an IO-Link®-compliant, distance sensor reference design that uses the Maxim MAX22513 IO-Link device transceiver and supports the IQ2 Development IO-Link stack.
The MAXREFDES173# IO-Link® temperature sensor uses the MAX14827A IO-Link device transceiver and supports the IQ2 Development™ IO-Link stack.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
