Dual-channel IO-Link device expansion board for STM32 Nucleo based on L6364Q

Dual channel IO-Link device expansion board based on L6364Q for STM32 Nucleo

Schematic PCB

MAXREFDES176#: IO-Link 16-channel digital input hub

Advanced factory automation solutions (i.e., Industry 4.0) require an increasing number of smart sensors, which are typically controlled using IO-Link point-to-point serial communication between the sensor and controller (master). As a leading provider of IO-Link sensor transceiver and master transceiver ICs, Maxim Integrated® also provides complete reference design solutions to help our customers improve their time to market. These proven designs cover all of the hardware and software requirements needed for compliance with the IO-Link standard.

Schematic PCB

Digital oscilloscope design based on STM32 (schematic diagram, source program, etc.)

Digital oscilloscope design based on STM32, including schematic diagram and source program, etc.

Schematic PCB

QorIQ ^® T2080 Reference Design Board

The QorIQ ^® T2080 Reference Design Board (T2080RDB) is a highly integrated tool that contains the QorIQ T2080 communications processor.

Schematic PCB

Compact reference design for low-voltage brushless power tools based on STSPIN32F0B

Compact reference design for low voltage brushless power tools based on STSPIN32F0B

Schematic PCB

OM13089: LPCXpresso54114 circuit board

LPCXpresso54114 circuit board

Schematic PCB

Design of smoke SMS alarm based on STM32 (program, PCB, schematic diagram)

Detect whether there is smoke and flammable gas in the environment. If the above gases are present, send an alarm text message to the mobile phone.

Schematic PCB

STGAP2DM Isolated Half-Bridge Gate Demonstration Board

STGAP2DM Isolated Half-Bridge Gate Demonstration Board

Schematic PCB

SRK2001 Adaptive Synchronous Rectification Controller Evaluation Board for LLC Resonant Converters with High Voltage External Sensing MOSFETs

Evaluation Board for the SRK2001 Adaptive Synchronous Rectification Controller for LLC Resonant Converters with High Voltage External Sensing MOSFETs

Schematic PCB

Water level measurement voice alarm device

The development of the water level measurement voice alarm device is based on GigaDevice Innovation GD32E231C-START evaluation board. It can measure, display, give voice warnings, and report water levels to the cloud. Suitable for IoT monitoring of containers holding liquids such as rain counters and small water tanks.

Schematic PCB

DER-865 - 2-wire normal/inverting BLE smart dimmer using LinkSwitch-TNZ and lossless AC zero-crossing detection

Two-wire forward/reverse phase Bluetooth low-energy (BLE) smart dimmer switch using LinkSwitch-TNZ (LNK3302D) with lossless AC zero-crossing detection

Schematic PCB

STM32 Nucleo stepper motor driver expansion board based on L6474

Stepper motor driver expansion board for STM32 Nucleo, based on L6474

Schematic PCB

15 mm x 15 mm dual layer antenna reference board for M24LR16E-R dual interface EEPROM, for reference only

15 mm x 15 mm dual layer antenna reference board for M24LR16E-R dual interface EEPROM, for archival purposes only

Schematic PCB

FRDM-KL25Z: Freedom development platform for Kinetis ^® KL14, KL15, KL24 and KL25 MCUs

Freedom KL25Z is an ultra-low-cost development platform for Kinetis ^{® L series MCUs based on Arm ®} Cortex ^® -M0+ processor .

Schematic PCB

Resonance: Resonance plug-in board for card10 to add video output

The board of this design is intended to sit between the fundamental and harmonic boards and monitor the SPI data running to the display. Onboard ECP5 will mirror the display and output a copy to a digital monitor.​

Schematic PCB

Qi-based wireless power receiver reference design using STWLC68 for wearable applications up to 2.5W

Qi-based wireless power receiver reference design for wearable applications up to 2.5 W using STWLC68

Schematic PCB

OM13077: LPCXpresso™ Board for LPC54100 Series MCUs

Schematic PCB

RDDRONE-T1ADAPT: Ethernet media converter for drones, rovers, mobile robots and cars

RDR-877 - 6W isolated flyback power supply, using LinkSwitch-TNZ to generate AC zero-crossing signals losslessly

6 W isolated flyback power supply with lossless generation of AC zero-crossing signal using LinkSwitch-TNZ (LNK3306D)

Schematic PCB

2021 College Student Electronic Design Competition Topic B Outstanding Works Collection (Three-Phase AC-DC Conversion Circuit)

Schematic PCB