The i.MX RT1060 EVK is an evaluation kit for the i.MX RT1060 crossover processor, which uses NXP's advanced Arm Cortex-M7 core implementation.
Power over Ethernet (PoE) - IEEE 802.3bt compliant interface reference design
The 56F8013 Demonstration Board is an evaluation module board that includes a NXP 56F8013 digital signal controller (DSC).
The new T1023 WLAN access point system is based on the QorIQ T1023 and is a semi-turnkey platform primarily designed for fast shipping to 802.11ac customers. This WLAN reference design board, jointly developed by NXP and Alpha Networks, can be quickly put into production with the latest 802.11ac capabilities, thus accelerating time to market. Not only does the board feature 2.4GHz and 5Ghz radios, it also comes with a PCIe slot for a potential 60GHz radio.
The MAXREFDES61# reference design ushers in the era of Industry 4.0. With a complete analog front-end for the next generation of ultra-small programmable logic controllers, this design meets the higher resolution and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features four channels of analog input, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
The TWR-K21D50M module is a development board for Kinetis K11, K12, K21 and K22 50 MHz 32-bit ARM Cortex-M4 MCUs.
16-bit, 300 kSPS low-power data acquisition system optimized for sub-Nyquist frequency input signals up to 4 kHz
This design is a breakout board for SGMII Gigabit Ethernet PHY DP83867C. It connects to SERDES via a SYZYGY-TXR connector to test and evaluate Ethernet over 1.25Gbps serial channels. 2 channels are used and CDR is required on the RX path. Compared to RGMII, SGMII significantly reduces the number of signals required for routing.
L6480 Discovery Kit: Development tools for exploring the L6480 motor controller
5 V and 12 V power line protection based on STEF05 and STEF12 electronic fuses
STUSB4710 Evaluation Board USB PD Controller with Onboard DC-DC
Foreign powerful, simple and portable oscilloscope design (schematic diagram, PCB, program source code, etc.)
Low-power LVDT signal conditioner with integrated synchronous demodulation function
LED lighting control system based on STM32F102C6T6 and STCS1APHR, using DMX512 controller
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design is a splitter for 4x PMOD connectors. All 32 I/O signals from the SYZYGY connector are brought out. 8 on each PMOD.
This reference design provides design guidelines, data, and more for a 1.6kW AC-DC converter power supply using a T-type three-level power factor correction (PFC) circuit.
A complete access control system (schematic diagram + source program)