CANable 2.0 is a small, low-cost, open-source USB to CAN adapter. CANable enumerates as a virtual serial port on your computer and acts as a serial line to CAN bus interface. Using the alternative candleLight firmware, CANable enumerates as a native CAN interface on Linux. CANable 2.0 supports standard CAN and CAN-FD.
The CANable adapter is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, BeagleBone, etc., making it ideal for integration into OEM products.
BLDC/PMSM driver demonstration board based on STM32 and SLLIMM nano™
Maxim's MAXREFDES36# reference design is an IO-Link, low-power, 16-channel digital input hub compliant with IEC 61131-9. It contains two octal digital input serializers, an IO-Link transceiver and efficient step-down converter. The entire design fits in a standard DIN rail printed circuit board (PCB) holder.
STSPIN32F0 advanced BLDC controller with embedded STM32 MCU evaluation board
This evaluation kit supports the fully integrated MC34717EP Dual Switch-Mode Power Supply—a dual-synchronous, buck-switching regulator.
ST7580 Power Line Network System-on-Chip Demonstration Kit
The circuit board in the project is drawn using Jiali Chuang EDA, and the code uses Arduino IDE, which is very suitable for beginners who are interested in robots.
The software, hardware, and mechanical structure are all open source.
Mainly using GD32F350 to make a light source controller to provide stable light source control for machine vision cameras, adding an external trigger function that can be connected to an external 24V signal (photoelectric sensor or PLC input), and a 24V output signal to trigger the camera to take pictures. Due to the diversity of application scenarios here, it is necessary to add user process configuration to control how long and when the four light sources are turned on respectively. Due to the life of the light source and the general glare of the light source, a parameter power-off retention function is added. In addition, it is also extended WIFI function. Live application scenarios are also tested in the video.
Complete high-speed, high common-mode rejection ratio (CMRR) precision analog front end for process control applications
The FRDM-MC-LVPMSM low-voltage, 3-phase permanent magnet synchronous motor (PMSM) Freedom development board platform adds motor control functions such as rotation or linear motion to your design applications.
The Industrial Linux SDK comes with Xenomai real-time Linux and supports the time-sensitive network Layer Scape reference design.
IO-Link master control multi-port evaluation board based on L6360
Demo board for M24LR16E-R, for archival purposes only
IO-Link industrial modular sensor board based on L6362A
Dynamic NFC tag expansion board for STM32 Nucleo, based on M24SR
12-bit, 1 MSPS single-supply, dual-chip data acquisition system for piezoelectric sensors
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
