Introduction: The design is modeled after WIFIduino, but the pin order is different.
Introduction: Splicing together the commonly used hardware needed for esp32 development
Introduction: I learned from this student’s 12344321A
Introduction: 1.27mm pin header interface 1602 screen driver board PCF8574T
Introduction: ESP8266 Astronaut Clock Arduino-ST7789-1.3 inch ips
Introduction: Macintosh case, compatible with 1.3-inch holocubic screen,
Introduction: ESP8266 Weather Clock
Introduction: This is just a simple circuit with an Atmel ATMEGA328P with some LEDs around it to measure the battery voltage. All LED currents are very low, so all LEDs will be driven by the microcontroller itself.
Introduction: 17-key keypad—based on atmage32u4—promicro integrated small system—--------code will be posted later
Introduction: Microcontroller development board based on ATtiny85, with USB interface,,,,, this is not the original 85, it is a modified one, but it can still be used. Please read the manual for specific use, because I haven’t tested it yet.
Introduction: Based on the RGB small keyboard built on MICRO32u4, I only made a simple layout. You can layout it yourself or add RGB lights yourself.
Introduction: SlimeVR/Slime VR tracker PCB, integrated charging circuit and voltage stabilizing circuit
Introduction: ESP32 drives GC9A01 circular screen to display pictures and clocks
Introduction: The garbage picked up by TB is put on a board for use.