This design is a wing add-on that attaches to the OrangeCrab and adds a Sharp Memory LCD. 400x240 on/off pixels. The board is the size of the monitor.
Simple branching of HDMI cable signals for analysis/verification of signal level and phase.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design splits the video output to a regular digital display and also supports input from the digital display. It connects to the SERDES via a SYZYGY-TXR connector. Would love to be able to test the 5Gbps output of high resolution GPDI.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This project is a splitter that outputs video to a regular digital display and also supports input from a digital display.
ESP32S2 + Sharp memory LCD + prototyping area
The icebreaker project is a very nice and handy little board. But it has a small flaw, the ice40 FPGA it uses is very simple, and it's generally fun to see people doing exciting projects with 5k LUTs. Sometimes it's convenient to have some extra space available when experimenting.
This project includes all the software and hardware design required to develop the T12 soldering station. The PID parameters are mature and the function completion is very high.
Little Bee is an affordable, high-performance current probe and magnetic field probe that allows you to debug and analyze electronic devices more efficiently.
The MAXREFDES1206 is a Power over Ethernet (PoE) powered device and active clamp forward converter that delivers up to 1A at 24V from a 39V to 57V supply voltage.
This reference design boosts a single-cell battery voltage to a 10W output using the MAX669 controller in the bootstrapped mode.
MAXREFDES1255 is a 4-switch buck-boost converter that gives a positive step-up/stepdown output voltage.
The DS28E18 is an easy-to-use bridge integrated circuit (IC) that operates as a 1-Wire® slave device to a host controller.
The MAXREFDES1274 is a buck converter using the MAX17501F high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs and internal compensation.
The MAXREFDES1247 is a miniature, 12V output, isolated power supply that can deliver up to 1A of load current.
The MAXREFDES1265 is a reference design showcasing the MAX7360 and MAX32625PICO with a low-cost, small-size keypad interface.
The MAXREFDES1277 reference design enables quick evaluation of the MAX17852/53 for 48V two-Wheeler battery management applications (BMS)
The MAXREFDES1213 is a reference design showcasing the MAX32630FTHR and MAX11311, as well as several other Maxim products, that demonstrates a small size, low-cost, portable electronic load (E-load) for testing power converters and PMICs.
The requirements for higher quality and performance in digital SLR cameras, DSC, and other 2S Li+ battery electronic equipment is increasing.
This reference design boosts a single-cell battery voltage input to a 10W output using the MAX16990 controller in bootstrapped mode.
The MAX16990 is a high-performance, current-mode, pulse-width mode (PWM) controller with 4μA (typ) shutdown current for wide input-voltage range boost converters/single-ended primary-inductor converters (SEPIC)
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
