MAXREFDES89# is an mbed®-compatible shield for the rapid development of brushed DC motor applications. The shield contains four MAX14871 full-bridge DC motor drivers for driving up to 4 motors. A MAX17501 DC-DC converter allows the system to operate from a single 7 to 36VDC power supply. Four MAX4704 4:1 multiplexers permit setting the current regulation mode of the MAX14871, while two MAX5387 digital potentiometers provide the ability to set the motor current limit. A MAX7300 GPIO expander supports interfacing each motor driver circuit to the mbed enabled microcontroller platform.
This document details the MAXREFDES112# subsystem reference design, a 17V to 36V input, 12V output, flyback isolated power supply capable of 10W. Design files and test results are included. Hardware is available for purchase.
This document details the MAXREFDES111# subsystem reference design, an 18V to 36V input, 5V/2W output, flyback isolated power supply. Design files and test results are included. Hardware is available for purchase.
MAXREFDES115# is an efficient active clamp topology design with 24V input, and a 5V output at 4A (20W) of power. The design features the MAX17599, an active clamp, current-mode PWM controller optimized for industrial supplies.
The NXP StarterTRAK USB Kit (TRK-USB-S12G128) provides an easy and cost-effective way to test drivers for NXP's 16-bit S12G MCUs.
Based on NXPThe Ethernet Video Development Kit for the MPC5604E MCU is suitable for next-generation automotive and general market camera applications.
The SABER board for smart devices is based on the i.MX 6Quad processor and supports 4-core processing, low-power multimedia and graphics applications.
Add BLDC and PMSM motor control functionality to your tower system design with the NXP TWR-MC-LV3PH module.
TWR-KV58F220M is a development tool for the KV5x MCU series products in the NXP Kinetis V series
NXPThe High Voltage Development Platform is an evaluation and development platform for Kinetis ® V Series MCUs and NXP DSCs.
The LPC845 Capacitive Touch Development Kit (OM40004) makes it easy to evaluate the capacitive touch functionality of LPC84x family devices.
TWR-MCF51AG-KIT is a development tool based on the MCF51AG128 microcontroller. The kit is part of the NXP Tower System, a modular, reconfigurable development platform that enables designers to accelerate time to market by packaging evaluation boards, tools and runtime software.
Freedom KL26Z is an ultra-low-cost development platform for Kinetis L-series KL16 and KL26 MCUs based on Arm ® Cortex ® -M0+ processors.
FRDM-KL27Z is an ultra-low-cost development platform for Kinetis L-series KL17 and KL27 MCUs based on Arm ® Cortex ® -M0+ processors.
The S12ZVML-MINIBRD evaluation board and the S12ZVML-MINIKIT evaluation kit are engineered for 3-phase BLDC and PMSM sensorless motor control applications.
The TWR-KM34Z75M board can operate in standalone mode or as part of a tower system, a modular development board platform that enables rapid prototyping and tool reconfiguration by reconfiguring the hardware. use.
The FRDM-MC-LVPMSM low-voltage, 3-phase permanent magnet synchronous motor (PMSM) Freedom development board platform adds motor control functions such as rotation or linear motion to your design applications.
Easily add capacitive touch functionality to your embedded design with the NXP TWRPI plug-in starter kit.
The FRDM-MC-LVMTR is a low voltage 3-phase motor designed for use in FRDM development systems.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
