S32V MIPI Cameras and De-Serializer

Selection of cameras and de-serializer to speed up vision application development with SBC-S32V234 and S32V234-EVB2 boards

MIMXRT1160-EVK: i.MX RT1160 Evaluation Kit

DeepView^™ Vision Starter Kit | Micro

Maivin AI Vision Starter Kit

S32K3X4EVB-Q257: Full-featured evaluation and development board for general-purpose applications

The S32K3X4EVB-Q257 is a full-featured evaluation and development board for general automotive applications.

S32K14WEVB-Q064: S32K144W evaluation board

S32K3X4EVB-Q172: Evaluation and development board for general-purpose applications ^new

PCA9957HN-ARD: Arduino Shield board

KITFS5600FRDMEVM: FS5600 Evaluation Board

KITFS5600SKTEVM: FS56 evaluation board (with socket)

PCA9959HN-ARD: Arduino^® Shield Board

PIN Pad POS Solution

Linux ^® POS Card Reader

RDDRONE-T1ADAPT: Ethernet media converter for drones, rovers, mobile robots and cars

DIY an SMT placement machine OpenPnP

Nowadays, almost all circuit boards use surface mount packaging, so I have always wanted to DIY a chip placement machine. After searching online for a long time, I finally decided to use the open source OpenPnP. The hardware and software are both open source.

Schematic PCB

The most powerful T12 integrated portable soldering iron with gyroscope and buzzer, PD power supply

Built-in gyroscope, buzzer, supports multiple fast charging protocols, 128x64 OLED screen, standard T12 fixed bayonet. Regarding the problem of grounding the soldering iron, you can use the PD power supply of Mac and prepare a triangle extension cable to solve the problem perfectly. Or using a power bank directly is not a big problem.

Schematic PCB

SWD offline programmer

This project uses STM32F103RET6 as the main control, and is modified based on ST's official CMSIS-DAP project to achieve offline and read-protected programming (because the project currently only has F103 series offline programming requirements, so only F103 programming is temporarily added. write algorithm).

Schematic PCB

Portable strip soldering station based on Arduino platform Atmege328p

Open sourced by Bilibili up, DCDC-LDO secondary step-down power supply, tc1047 for cold-end compensation, built-in curve fitting calibration function, and supports 65W gallium nitride charger.

Schematic PCB

Data transparent transmission based on MM32W wireless MCU series

Introducing a Bluetooth case - a data transparent transmission application developed based on the MM32W series.

Add a Bluetooth remote control setting circuit to the 4-20mA two-wire passive digital display meter

The RSL10 module is plugged into the self-made optocoupler isolation circuit board, and the entire module is connected in series with the modified target instrument (4-20mA two-wire passive digital display meter) and then connected to the 4- In the 20mA current loop, when the actual working zero current is 4mA, the target instrument displays 4.000mA in the current mode; the overall voltage drop of the circuit board of the work is 2.513V; the changed range or unit is sent to the RSL10 on the circuit of the work through the mobile APP Setting command, the target instrument (currently its own voltage drops by more than 1V) will be changed by Bluetooth remote control to change the setting state, such as switching to different ranges or displaying different measured physical quantity units, etc.

Schematic PCB