This reference design is a complete RF front-end solution for a GPS receiver using Maxim's MAX2769 GPS receiver chip. The MAX2769 is a low cost, single conversion, low IF GPS receiver that offers two integrated LNAs with different specifications, I/Q channel filters with variable bandwidth and order, and a digital IF output that supports 1-bit and 2-bit operation. This reference design offers high performance, small size, and low BOM cost.
The MAX3580 DVB-T reference design meets NorDig 1.0.3 and MBRAI requirements. This NIM design includes the MAX3580 direct-conversion tuner and a DVB-T demodulator/decoder. A discrete, active loop-through with low power consumption and low cost is included. Target applications include digital televisions, digital terrestrial set-tops, laptop televisions, automotive televisions, and USB peripherals.
This design idea shows how you can design a simple wireless temperature-monitoring system with data-logging capabilities by using a local temperature sensor and an ASK transmitter and receiver pair.
Pasadena (MAXREFDES31#) is a highly efficient, flyback, 3.3V and 5V Class 4 powered device (PD) with a 40V to 57V auxiliary input. The design features the MAX5969B as the controller. The MAX5974A controls current-mode PWM converters and provides frequency foldback for both the auxiliary input and power-over-Ethernet (PoE) applications. The design is a high-performance, compact, IEEE® 802.3af/at compliant, cost-efficient solution for a PD with power level up to Class 4. The design can also support the auxiliary-input to provide approximately 21W output power.
Maxim's Power Amplifier Biasing (MAXREFDES39#) features a PA Bias circuit with the flexible Programmable Mixed Signal I/O (PIXI™) product, the MAX11300. The 2-stage amplifier design biases a 15W, LDMOS PA implemented with unprecedented simplicity, and is capable of biasing many existing PAs. Design files are available and boards are available for purchase.
In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from 500mW to 130W. The design is specified to meet the XILINX Versal ACAP AI Core Series UC1/3 requirements. The design layout is also optimized for the Versal ACAP IC.
The configurable development system (CDS) supports a wide range of NXP processors built on Power Architecture technology.
The MPC8272ADS board is designed to aid hardware and software developers of the PowerQUICC II family by providing an evaluation platform for MPC8272/48 derivatives in the 516-pin PBGA (ZQ/VR) package.
NXPThe TWR-P1025 processor module is also available as a standalone single-board computer (SBC) development platform or as a towerSystem rapid prototyping development platform.
The MPC-LS-VNP-EVB is an evaluation and development board designed for automotive network processing applications and is suitable for advanced gateway development to deliver new vehicle services and edge data analytics.
The QorIQ ® T1040 Reference Design Board is a high-performance evaluation, development and test platform supporting the T1040/20 communications processor.
The LS1012A-RDB is a compact tool that can be used to evaluate LS1012A solutions for consumer electronics, industrial control and networking applications.
The QorIQ ® P5040 Reference Design Board (P5040-RDB) is a flexible system supporting the quad-core P5040 processor.
NXPThe P1010 RDB is a highly integrated reference design board that can help you get to market faster.
CWH-CTP-CTX10-YE is a removable debugger header for QorIQ LS.
The LS1024A-RDB is suitable for VoIP and video home gateways, security appliances, 802.11n enterprise access points and commercial network-attached storage products.
The QorIQ ® T2080 Reference Design Board (T2080RDB) is a highly integrated tool that contains the QorIQ T2080 communications processor.
NXPCWH-CTP-COP-YE is a removable debugger header for Power Architecture® processors.
NXPThe P2020RDB is a highly integrated reference design board that can help you get to market faster.
This tool optimizes the FRDM-LS1012A, adds more features, and is suitable for IoT, edge computing and other advanced embedded applications, providing a more excellent hands-on experience. These features include easy access to processor I/O, low power operation, Micro SD card storage, M2 connector, small form factor, and expansion board options via mikroBUS.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
