TIDA-00333: Dual isolation, half-duplex RS485 repeater reference design, with built-in transceiver control

Suitable for long distance RS-485 networks. The design provides transient protection from the effects of ESD, EFT and surge transients as specified in the IEC 61000 transient immunity standard.

Schematic PCB

OCEANSIDE (MAXREFDES9#): 3.3V to 15V input, ±15V (±12V) output, isolated power supply

This document details the Oceanside (MAXREFDES9#) subsystem reference design, a 3.3V to 15V input, ±15V (±12V) output, isolated power supply. The Oceanside design includes a high-efficiency step-up controller, a 36V H-bridge transformer driver for isolated supplies, a wide input range, and a pair of adjustable output low dropout (LDO) linear regulator. Test results and hardware files are included.

Schematic PCB

For smart devices, SABER board based on i.MX 6SoloX application processor

The SABER board for smart devices is based on the i.MX 6SoloX processor and supports 4-core processing, low-power multimedia and graphics applications.

Schematic PCB

MCIMX8QXP-CPU: i.MX 8QuadXPlus Multi-Sensor Enablement Kit (MEK)

NXP MEK provides a platform for evaluation and development of the i.MX 8X series of application processors based on Arm Cortex A35 + Cortex-M4F.

Schematic PCB

Complex robotic arm drawings

A complete collection of complex robotic arm drawings, including Fanuc 100iB

Schematic PCB

CN0269

18-bit, 1.33 MSPS, 16-channel data acquisition system

Schematic PCB

Protues simulation example (8051)-parallel port to serial port.rar

Protues simulation example (8051)-parallel port to serial port

Schematic PCB

Homemade 10KV electronic load

Commercial electronic loads are more expensive, especially high-power loads such as computer power supplies that must handle transient current spikes well above their nominal ratings (1800W spike for a 600W GPU) and should be tested under worst-case conditions to Ensure stability.

Schematic PCB

PTN3816EVM: DisplayPort Linear Redriver Evaluation Board for the PNT3816

MAXREFDES173#: IO-Link local temperature sensor

The MAXREFDES173# IO-Link^® temperature sensor uses the MAX14827A IO-Link device transceiver and supports the IQ2 Development™ IO-Link stack.

Protues simulation example (8051)-SPI demonstration file two 595 docking

Protues simulation example (8051)-SPI demonstration file two 595 docking

Schematic PCB

Arduino UNO Mini Limited Edition Open Source Information

Open source material for the Arduino UNO Mini Limited Edition.

Schematic PCB

KIT-TPLSNIFEVB: Transformer Physical Layer (TPL) sniffer tool

SC18IS606-EVB: I ² C to SPI Bridge Evaluation Board ^new

Proceedings of the Electronic Design Competition

The collection of papers from previous electronic design competitions includes design ideas, circuit diagrams and corresponding program flow charts for function signal generators, oscilloscopes, automatically controlled balancing cars, radios, etc.

Schematic PCB

jtag-programmer: JTAG programmer based on FT232H

​Gregory Davill is a technical expert from Australia who is very famous and active in the field of open source hardware. In December 2020, he insisted on designing a circuit board every day, using KiCad to complete the circuit design and PCB layout and routing. This is the adventure-calendar-of-circuits-2020 project. This design is a JTAG programmer based on FT232H.

Schematic PCB

TWR-56F8400: DSC MC56F84789 Motor and Power Control Tower System Module

Schematic PCB

SJA1110 100Base-T1 Multi-Gigabit Ethernet Switch Example Board

Schematic PCB

P3A9606JK-EVB: 2-channel converter evaluation board

TWR-IND-IO: Industrial I/O Tower System Module