MIMXRT1050-EVK: i.MX RT1050 Evaluation Kit

The i.MX RT1050 EVK is an entry-level, low-cost development platform equipped with the i.MX RT1050 crossover processor based on Arm Cortex-M7.

OM13503: PCA8539 Demonstration Board

MCIMX8QM-CPU: i.MX 8QuadMax Multi-Sensor Enablement Kit (MEK)

NXP MEK provides a platform for evaluation and development of the i.MX 8 application processor family based on Arm Cortex A72+A53 + Cortex-M4F.

Schematic PCB

Multi-cell battery manager unit with integrated charging, fuel monitoring, authentication and protection functions

The Texas Instruments (TI) bq40z60 device is a battery pack manager that integrates battery charge control output, fuel monitoring and protection functions to enable fully autonomous operation of 2- to 4-cell Li-ion and Li-polymer battery packs. This architecture enables internal communication between the gas-monitoring processor and the battery charger controller to optimize charge based on external load conditions and power path source management during system load transients and adapter current limits. The charging current efficiency is different for different power delivery external components such as NFETs, inductors and sense resistors.

Schematic PCB

M523xEVB: MCF5235 Evaluation Board

Schematic PCB

Open source current probe based on Rogowski coil

Schematic PCB

APMOTOR56F8000: Motor Control Demonstration System

Schematic PCB

Optimize the load switching function of DS2715 battery charger

Integrating a battery-load switch function into a smart-charger IC greatly benefits low-cost applications. The DS2715 battery-charger IC intelligently senses battery loading after removal of the charge source to seamlessly maintain power to connected loads. This application note details examples of several application circuits that optimize the performance of the DS2715. Specifically, it presents a circuit for applications in which the DS2715 is connected to noncontinuous loads, and a circuit for powering the load directly from batteries.

CN0146

Construct a low-cost programmable gain instrumentation amplifier circuit using the four-channel single-pole single-throw switch ADG1611 and the instrumentation amplifier AD620

Schematic PCB

MIMXRT1064-EVK: i.MX RT1064 Evaluation Kit

i.MX RT1064 EVK is an evaluation kit for the i.MX RT1064 crossover processor, which uses NXP’s advanced Arm Cortex-M7 core implementation.

350 W-48 V Demonstration Board using 1x STAC2942B for FM Broadcast Application (VHF Amplifier 87.5-108 MHz)

350 W - 48 V Demonstration Board using 1x STAC2942B for FM Broadcast Application (VHF Amplifier 87.5 - 108 MHz)

Schematic PCB

CN0186

Phase Coherent FSK Modulator

Schematic PCB

CN0296

Low cost, high performance SOUND BAR system

Schematic PCB

PD85035S-E based 45 W/380-490 MHz RF power module for mobile radio applications

Schematic PCB

CN0325

PLC/DCS universal analog input using 4-pin or 6-pin terminal strip

Schematic PCB

SJA1105Q-EVB: Ethernet switch and PHY evaluation board.

FRDM-KL43Z: Freedom Development Platform for Kinetis^® KL43, KL33, KL27, KL17 and KL13 MCUs

Schematic PCB

OM13077: LPCXpresso™ Board for LPC54100 Series MCUs

Schematic PCB

LET9060S based RF power amplifier for 2-way radios and general wireless services

LET9060S based RF power amplifier for 2-way radios and general wireless services

Schematic PCB

OM13587: PTN5110 Type-C Demonstration Kit

The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.

Schematic PCB