2-Channel Converter Evaluation Board

Schematic PCB

CAN SIC Evaluation Board

Schematic PCB

SJA1110 100Base-T1 Multi-Gigabit Ethernet Switch Example Board

Schematic PCB

PCAL6524EV 24-Bit General IO Arduino ^® Shield

Schematic PCB

Arduino ^® Shield expansion board

Schematic PCB

PCAL6534EV 34-bit general-purpose IO Arduino ^® Shield expansion board

Schematic PCB

Tigard: an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H

Tigard is an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H. By combining commonly used pins, labeled harnesses, onboard level translation, and logic analyzer connections, it is specifically designed to connect to and communicate with low-speed interfaces on reverse-engineered hardware targets.

Schematic PCB

CANFDuino: The best platform for open source, CAN-bus Arduino projects

CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.

Schematic PCB

pmod-sd-dummy: virtual SD card connected to the host system via SDIO

​This design has a PMOD for the SD card to emulate the SD card to the host system.

Schematic PCB

pmod-quad-7segment: PMOD of four 7-segment digital tubes

A PMOD with a quad 7-segment display connected to a pair of 74hc595 shift registers. There are 3 tactile buttons.

Schematic PCB

TIDA-00333: Dual isolation, half-duplex RS485 repeater reference design, with built-in transceiver control

Suitable for long distance RS-485 networks. The design provides transient protection from the effects of ESD, EFT and surge transients as specified in the IEC 61000 transient immunity standard.

Schematic PCB

pcie_x4: SYZYGY creates PCIe x4 add-in card

SYZYGY is an FPGA extension standard for medium to high speed interfaces. This breakout connects the SerDes in the SYZYGY-TXR connector to the card edge to act as a PCIe x4 add-in card. This breakout is very simple and can be made into a shorter SYZYGY pod.

Schematic PCB

pcie_x1: SYZYGY creates a compact PCIe x1 add-in card

SYZYGY is an FPGA extension standard for medium to high speed interfaces. This breakout connects the Channel 0 TX/RX SerDes from the SYZYGY-TXR connector to the edge of the card to act as a PCIe x1 add-in card.

Schematic PCB

memory-lcd-wing: Minimal wing for OrangeCrab

This design is a wing add-on that attaches to the OrangeCrab and adds a Sharp Memory LCD. 400x240 on/off pixels. The board is the size of the monitor.

Schematic PCB

MAXREFDES1247: Tiny 12W DC-DC flyback converter using MAX17596

The MAXREFDES1247 is a miniature, 12V output, isolated power supply that can deliver up to 1A of load current.

Schematic PCB

Production Line Tool launched by Dialog

The software part of this tool (including the host computer) is not open source, but the schematic diagram and PCB related files are.

Schematic PCB

SC18IM704-EVB: UART to I2C ^bridge evaluation board ^new

PCF2131-ARD: PCF2131/PCA2131 Arduino ^® Shield expansion board

SC18IS604-EVB: SPI to I2C ^Bridge Evaluation Board ^new

SC18IS606-EVB: I ² C to SPI Bridge Evaluation Board ^new