This is my program #include
#define SS0
#define SCK1
#define MOSI2
#define MISO3
#define OE7
#define SS_H()PORTB|=(1
Mega128 HC595 drives four-in-one digital tube
According to the timing requirements, we set the VM/VDEN signal as the ENAB signal of the LCD, and the VCLK signal as the NCLK signal of the LCD. To obtain the appropriate VM and VCLK waveforms, we mu
How to adjust the timing when porting the LCD display program of 51 to AVR? The logic should be fine and it can run on 51. It must be that the timing is wrong, so the data cannot be written.
The setting range of 1PG's #18#17 position setting (1) is "0 to positive or negative 999999". If my servo driver is set to input 100,000 pulses per revolution, then the maximum number of revolutions I
[align=left][color=#000]Choosing the inductor value for the output filter of a Class D audio amplifier is always a critical design decision. With the advent of a new generation of ultra-low distortion