Hardware platform: EK-STM3210ESoftware platform: uVision4program uses V2.02 library, the program runs to Status = SD_Init(); error returns 0X03. The serial port can communicate normally. The following
AC is connected to the RS485 line? Haven't found the reason yet? Recently, I tested that all the components on an RS485 line were damaged, and the chip was broken. Finally, I found that AC was connect
There are two options : either run individual ICL commands ( similar to sending individual SCPI commands ) or write test scripts in the Test Script Language. The Test Script Language ( TSL ) is a prog
Recently, when using the key interrupt to wake up in the STM32 shutdown mode, pressing the key repeatedly will cause a freeze. After multiple tests, it is found that the interrupt can be entered befor
I can't find a way to set the timer to count the internal clock in CodeWarrior. I used to be able to directly query the value of the self-increment register when learning microcontrollers, but I can't