In principle, the system function of the Hilbert transform is to shift the phase of the input signal by -90° for positive frequencies and 90° for negative frequencies. That is, a signal passes through
When the 280049 chip uses TI's library function, the register settings do not change after SPIA initialization, all are 0. At this time, you need to enable SPIA or SPIB. This problem has troubled me f
I have been busy with my graduation project recently, and I used an electric actuator (cylinder) from SMC. However, due to financial problems, I did not buy all the parts. I encountered some problems.
I use STM8S005K6T6 MCU for AD acquisition. It works fine. But every time I run the AD program, it will affect the output of other ports. For example, the high and low levels of the PC1 and PE5 ports a
[i=s]This post was last edited by btty038 on 2019-9-19 11:32[/i]Why do people who use Google get higher year-end bonuses ?1. Find materialsDigikey http://www.digikey.cn
Mouser http://www.mouser.cn
htt
TMS570 battery balancing management system solution. When I use TTL wires to directly connect the EM1402 board to the computer, the bq76PL455_GUI software can be opened normally and display the voltag