This design pairs the ultra-low-power MSP430 MCU with a sub-1GHz RF transceiver to achieve a battery-powered wireless sensor monitoring solution. This design demonstrates access points and wireless nodes that can share sensor data wirelessly using the network protocol "SimpliciTI". A PC-side GUI is also provided to visually display wireless data transmitted/received between various nodes and access points.
This verification design utilizes a triangle wave generator and comparator to generate a pulse-width modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. The op amp and comparator generate a triangular waveform, which is then passed to one input of the comparator. By passing the input voltage to the other comparator inputs, a PWM waveform is generated. Negative feedback from the PWM waveform to the error amplifier is used to ensure high accuracy and linearity of the output. This design was constructed using the OPA2365 op amp, TLV3502 comparator, and REF3325 reference. Learn more about TI's high-precision designs
This TI Precision Verified Design provides the principles, component selection, simulation, PCB design and measurement details for a single-ended input of a specific differential output circuit that converts a single-ended input from +0.1V to +2.4V ±2.3V differential output on a single +2.7V supply. The output range is specifically limited to maximize its linearity. This circuit consists of 2 amplifiers. An amplifier acts as a buffer, creating the voltage Vout+. The second amplifier inverts the input and increases the reference voltage to produce Vout-. Both Vout+ and Vout- range from 0.1V to 2.4V. The voltage difference Vdiff is the difference between Vout+ and Vout-. This will give a differential output voltage range of +2.3V.
This TI verified design implements a 16-bit differential 4-channel multiplexed data acquisition system at 400 KSPS throughput for high voltage differential inputs for ±20 V (40 Vpk-pk) industrial applications. The circuit is implemented with a 16-bit successive approximation register (SAR) analog-to-digital converter (ADC), a precision high-voltage signal conditioning front end, and a 4-channel differential multiplexer (MUX). This design details the use of the OPA192 and OPA140 to optimize a precision high-voltage front-end driver circuit to achieve the excellent dynamic performance of the ADS8864 .
This TI precision verification design circuit converts the differential current output of an audio DAC into a single-ended voltage that can drive low-impedance headphones. This design achieves the high-fidelity performance levels currently being promoted in cell phones and mobile audio players.
This TI verified design provides principles, component selection, TINA-TI simulation, verification and measurement performance, Altium schematic, PCB layout for automotive battery pack monitoring applications. This design uses the automotive AEC-Q100 qualified 12-bit, 4-channel, 1Msps SAR ADC ADS7950-Q1 and isolated system hardware. This isolated input design with four-wire shunt resistors is ideal for such applications using high and low voltage automotive battery packs. It can be used to monitor battery pack current (from -5A to +5A) and extremely high voltages (up to 750V). TINA simulations on input and reference drivers validate design solutions and component selections, while measured results prove the performance of precision designs.
TIDA-00679 TI reference design demonstrates a solution for automotive LED taillight applications (tail/brake lights, turn signals, reverse lights). This reference design uses the TPS92630 linear LED driver, which is powered directly from the car battery through a smart battery reverse diode. The design offers the potential for cost savings and efficiency through low power dissipation and improved system thermal performance. The reference design also includes CISPR25 testing, pulse testing (per ISO 7637-2), and EMI/EMC radiated and conducted emissions testing. See TIDA-00677 for a similar design using the TPS92630-Q1 driven by a buck converter . See TIDA-00678 for a similar design driven by a boost converter .
This TI reference design is for an automotive high-side dimmable taillight that uses a BCM to provide the taillight. In this TI reference design, the high-side driver TPS1H100-Q1 is used to output PWM power with different duty cycles. Linear LED drivers TPS92630-Q1 and TPS92638-Q1 are used to drive LEDs with constant current.
This design is a simulation solution for car taillights with sequential turning animations. This design is compatible with TL81000 RI and BCI testing (third party EMC laboratory). This design also demonstrates complete automotive diagnostics for low quiescent current in failure modes.
This camera design demonstrates the smallest solution size for a 1.3-megapixel automotive camera. Only a single coaxial cable connection provides digital video, power, camera control and diagnostics. The output video format is 10-bit up to 100MHz or 12-bit up to 75MHz.
The TIDA-00705 is an ultra-compact (1”x1”x1”) high-efficiency bidirectional DC to DC power converter capable of delivering 480W for low energy storage (LES) and battery backup power applications. Specifically, it is designed for server battery backup Unit (BBU) embedded server PSU. The reference design is based on a two-phase spaced half-bridge power stage controlled using the UCD3138 digital power stage controller. The design has built-in DC bus overcurrent, overvoltage protection and battery overcurrent, overvoltage protection. Voltage protection and phase current balancing to dissipate heat.
The TIDA-00821 reference design is a stackable monitor and protector for use in large lithium-ion batteries that provides monitoring, balancing and communication functions. Each bq76PL536A-Q1 EVM can manage 3 to 6 cells in Li-ion battery applications. Up to 32 bq76PL536A-Q1 EVM modules can be stacked. The system provides fast cell balancing, diagnostic capabilities, and module-to-controller communication. In addition, an independent
protection circuit is integrated.
TIDA-00987 is a reference design for automotive media ports requiring data transmission. This design supports USB 2.0 and USB 3.0 data via the 15W USB Type-C™ port. Customers can accelerate their media port systems by leveraging a complete reference design that includes AEC-Q100 compliant CISPR 25 Category 5 tested analog integrated circuits (ICs). This design creates a reliable and flexible solution that allows the system to charge USB Type-C and legacy devices in a small 1 x 2.5-inch solution.
The USB Type-C™ and Power Delivery (PD) MicroDock Evaluation Module (EVM) provides a complete USB Type-C dock reference solution including audio, USB data, power delivery and video. The EVM has a small 2-inch × 4-inch form factor and supports both sourcing and sinking power capabilities through the USB Type-C PD host port. Video output capabilities include DisplayPort and HDMI.
This reference design demonstrates an interface implementation to multiple high-voltage bipolar input, 8-channel, multiplexed input SAR ADCs (6) via a Sitara Arm processor using a Programmable Real-Time Unit (PRU- ICSS) expands the number of input channels. The ADCs can be configured so that the same channels can be sampled simultaneously across all ADCs. This design highlights the PRU-ICSS's ability to handle a data rate of 1536ksps (each sample = 16 bits) (640 samples sampled per line cycle). For a 50Hz period, this equates to 32ksps per channel between 6 ADCs simultaneously (640 samples/period*50Hz*6 ADC*8 channels = 1536ksps). In addition, a second PRU is used to post-process the data to achieve coherent sampling.
Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off board EV chargers and telecom rectifiers. Control design of the rectifier can be complex. This design illustrates a method to control the power stage using C2000™ microcontrollers (MCUs). It also enables monitoring and control of Vienna rectifier based on the HTTP GUI page and Ethernet support(F2838x only).The hardware and software available with this design helps accelerate your time to market.Vienna rectifier power topology is used in high power three phase power factor correction applications such as off board Electric Vehicle Charging and telecom rectifiers. This design illustrates how to control a vienns rectifier using C2000 Microcontroller. Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off-board electric vehicleEV chargers and telecom rectifiers. Control design of the rectifier can be complex. This design illustrates a method to control the power stage using C2000™ microcontrollers. The hardware and software available with this design helps accelerate your time to market.The Vienna rectifier power topology is used in high power three phase power factor correction applications such as off-board electric vehicle charging and telecom rectifiers. This design illustrates how to control a Vienna rectifier using C200-MCU.
Li-Ion battery formation and electrical testing require accurate voltage and current control, usually to better than ±0.05% over the specified temperature range. This reference design proposes a solution for high-current (up to 50 A) battery tester applications supporting input (bus) voltages from 8 V–16 V and output load (battery) voltages from 0V–5V. The design utilizes an integrated multi-phase bidirectional controller, LM5170, combined with a high precisiondata converters and instrumentation amplifiers to achieve charge and discharge accuracies of 0.01% full scale. To maximize battery capacity and minimize battery formation time, the design uses highly-accurate constant current (CC) and constant voltage (CV) calibration loops with a simplified interface. All key design theories are described guiding users through the part selection process and optimization. Finally, schematic, board layout, hardware testing, and results are also presented.
The TIDA-01494 reference design is a compact, high-efficiency, 24V DC, 480W nominal, 720W peak output reference design for industrial AC/DC power supplies. The circuit includes a front-end continuous conduction mode (CCM) power factor correction (PFC) circuit, followed by a powerful LLC stage with synchronous rectification. The design ensures an efficiency greater than 93.5% over a wide load range, allowing the system to operate without forced cooling. The UCC256301-based LLC stage utilizes the ZCS avoidance feature in the UC256301 to achieve peak output power, minimizing the PFC bulk capacitor to meet holdup requirements while enabling the system to handle short circuit and overcurrent conditions. The UCC24612-2-based synchronous rectifier helps minimize losses in the output rectifier, while its advanced proportional gate driver and dead-time optimization help avoid breakdown and minimize losses.
The Energy Monitor is designed as a complete set of tools for measuring and displaying the energy consumption of individual loads within a smart building, such as major appliances. This tool allows engineers to quickly evaluate TI's solutions for low-cost energy metering applications. The reference design comes with hardware and software design files to speed engineers' development process. The energy monitor design can also be expanded to integrate with TI's ZigBee and Wifi reference designs to add wireless communication capabilities to the end product.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
