To provide system designers with a new cost-effective and simple alternative solution for high-precision temperature measurement, this reference design introduces a new ultra-small 2-pin digital output IC temperature sensor with a single line pulse counting interface that improves reliability and greatly simplifies the design of electrically isolated architectures to send power and unidirectional data through the same low-profile transformer and remote operation. Additionally, error budget calculations are simpler because there are fewer error sources. Cost budget, accuracy, size, and simplicity of connection to other circuit components are major factors to consider when selecting a sensor to perform the job, and this reference design system can be of great assistance in meeting these requirements. This design has a maximum measurement error of less than 0.25°C over the -50°C to 150°C temperature range, provides 400VRMS of functional isolation, and is pre-certified to IEC61000-4-4 to significantly reduce the cost of high-accuracy temperature measurement systems Development design time.
TIDA-00556 is a low-power, space-saving "transport mode" solution targeted at wearable devices and other small portable electronics that can be implemented using simple, low-cost load switches.
DI-198 - Wide Range DVD Player Multiple Output Power Supply Without Need for Optocoupler
Two outputs: 1: 0-30V/4A 2: 5V/1.5A (fixed output) Voltage resolution 0.458mV, current resolution 0.076mA Voltage step 0.0073V, the actual 0.1V step adjustment reset circuit is Both 51 and AVR are compatible. You can't solder all four original components. You can solder the reset circuit according to which chip you use!
Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications. However, the use of an optocoupler or an auxiliary winding on the flyback transformer for voltage feedback across the isolation barrier increases the number of components and design complexity. The MAX17690 eliminates the need for an optocoupler or auxiliary transformer winding and achieves ±5% output voltage regulation over line, load, and temperature variations.
Evaluation board for the MC33984 dual 4.0 mOhm switch designed to replace electromechanical relays, fuses and discrete devices in power management applications.
The MAX17596 is a peak-current-mode controller for designing wide input-voltage flyback regulators.
The PMP15008 reference design is a small high-frequency point-of-load regulator. The unique converter topology helps achieve high efficiency when operating at 2MHz per phase. This design is suitable for applications such as processor or memory power supplies with 8V to 14V input, 0.5V to 2V, and up to 10A output.
The MAXREFDES1085 is a miniature, 24V output, isolated power supply that can deliver up to 1A of load current. The design uses the MAX17596 peak-current-mode controller in discontinuous-conduction mode (DCM) flyback topology running at 125kHz.
The MAX17574, high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4.5V to 60V input. The converter can deliver up to 3A current.
The FRDM-17510EVB module is an easy-to-use development board that allows the user to perform all functions of the MPC17510AEJ H-bridge motor driver IC.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
