RDR-877 - 6W isolated flyback power supply, using LinkSwitch-TNZ to generate AC zero-crossing signals losslessly

6 W isolated flyback power supply with lossless generation of AC zero-crossing signal using LinkSwitch-TNZ (LNK3306D)

Schematic PCB

Shunt-Based High Current Measurement (200A) Reference Design Using Reinforced Isolation Amplifier

The TIDA-00912 TI reference design provides a complete isolated current measurement reference solution using an external shunt, reinforced isolation amplifier, and isolated power supply. Parallel voltage is limited to 25mV. This reduces power dissipation in parallel connection, enabling high current measurement ranges up to 200A. The shunt voltage is amplified by an instrumentation amplifier configuration with a gain of 10 to match the isolation amplifier input range for better signal-to-noise ratio. The output of the isolation amplifier is level shifted and adjusted to match the full input range of the 3.3V ADC. This design uses a free-running transformer driver operating at 410kHz to generate an isolated supply voltage in a small form factor to power the high-voltage side of the circuit. 

Schematic PCB

MOSFET parallel use (TK62N60X) application circuit

12V/12W PSR Flyback Reference Design

The PMP20634 reference design is an isolated DCM flyback design that provides a universal AC line input from 85V to 265V and produces a 12V output capable of handling a 12W load. The design uses the UCC28730 controller to achieve ultra-low standby power at no load. It achieves 85% efficiency in high and low voltage lines and measures 1 x 3 inches on a 2-layer circuit board.

Schematic PCB

KITVR5510xA0EVM: VR5510 Evaluation Board

TEA1999DB1546: TEA1999TS USB BC1.2 flyback synchronous rectification controller

Noise-resistant capacitive touch HMI reference design

The Noise Tolerant Capacitive Touch HMI Design (TIDM-CAPTOUCHEMCREF) is a reference design for implementing a noise tolerant capacitive touch human machine interface (HMI). It integrates TI's MSP430FR2633 microcontroller (MCU) with high-performance CapTIvate™ touch technology and the TPS7A4533 linear regulator and UCC28910 flyback switch. This reference design demonstrates how a design that can pass challenging conducted RF immunity, electrical fast transient/burst immunity can be designed using a trinity design approach that includes hardware design techniques, CapTIvate technology peripheral functionality, and software signal technology. Hardware and software for system-level testing of electrostatic discharge immunity and electrostatic discharge immunity.

Schematic PCB

PCF85063AT-ARD: Arduino Shield -I ² C bus

3S3P Automotive Tail Light (RCL) LED Driver Reference Design

This application note presents a reference design for a rear combination lamp (RCL) LED driver in a 3-series, 3-parallel (3S3P) configuration. Using the MAX16823 linear driver and external BJTs, this design provides 200mA per string as well as enhanced heat dissipation. Also included is PWM dimming circuitry for tail-light inputs and full brightness for brake-light inputs. Double-battery and load-dump conditions have been taken into consideration.

NCV76124EVK: NCV76124 Evaluation Kit

MAXREFDES1155: Dual-channel, RTD/TC measurement system based on MAX11410

MAXREFDES1155 is a configurable two-channel resistance temperature detector (RTD)/thermocouple (TC) measurement system.

Schematic PCB

CC1120EM 868/915MHz Reference Design

This "RF Layout Reference Design" demonstrates excellent decoupling and layout techniques for low power RF devices in the 868 MHz and 915 MHz bands.

Schematic PCB

MAXREFDES1198: 4.5V to 36V ultra-small input and 3.3V, 2A, high-efficiency, synchronous step-down DC-DC converter

Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.

High-resolution 3D scanner for factory automation with DLP® technology

This factory automation reference design uses Texas Instruments' DLP® Advanced Light Control Software Development Kit (SDK) for the LightCrafter™ family of controllers , allowing developers to integrate TI's digital micromirror device (DMD) technology with cameras and sensors. , motors or other peripherals to easily build 3D point clouds. With more than 2 million micromirrors, these high-resolution systems leverage the DLP® LightCrafter™ 6500 Evaluation Module (EVM), which features the DLP6500 1080p DMD, ensuring flexible control of precise graphics for structured lighting solutions in industrial applications.

Schematic PCB

LMG5200 48V to 1V/40A single-stage converter reference design

PMP4497 is a GaN-based reference design solution suitable for Vcore applications such as FPGA and ASIC. With high integration and low switching losses, the GaN module LMG5200 enables high-efficiency single-stage 48V to 1.0V solutions, replacing traditional two-stage solutions. This reference design demonstrates the GaN performance and system advantages of this solution compared to two-level solutions. Low cost ER18 flat PCB transformer embedded on board. This reference design is compact in size (45mm*26mm*11mm). Further size reduction can be achieved by optimizing frequency and components.

CARMEL (MAXREFDES18#): High-precision analog current/voltage output

The Carmel (MAXREFDES18#) subsystem reference design provides a high-accuracy analog current/voltage output in a compact, galvanically isolated form factor. This design uniquely fits programmable logic controllers (PLC), distributed control systems (DCS), and other industrial applications . Hardware and firmware design files and lab measurements are provided for rapid prototyping and development. The board is also available for purchase.

Schematic PCB

Ultrasonic TDC Flow Meter Reference Design

TIDM-ULTRASONIC-FLOW-TDC is a reference design for an ultrasonic flow meter (water, gas or heat meter) with LCD, using a time-to-digital converter and an ultra-low power MCU. The solution includes optimized leak detection, low power consumption and small form factor, which are important requirements for water, heat and gas meter applications. The design also includes a high-efficiency DC-DC converter for system power supply.

Schematic PCB

300W Isolated DC-DC Converter

Schematic PCB

Multi-Protocol Industrial Ethernet Detection with PRU-ICSS Reference Design for Industrial Automation Applications

There are currently more than 30 industry standards for Industrial Ethernet in the field of industrial automation. Some mature real-time Ethernet protocols such as EtherCAT, EtherNet/IP, PROFINET, Sercos III, and PowerLink require specialized MAC hardware support for FPGAs or ASICs. The Programmable Real-Time Unit within the Industrial Communication Subsystem (PRU-ICSS) exists as a hardware module of the Sitara processor family and will replace FPGAs or ASICs with a single chip solution. Firmware in PRU-ICSS can be used to detect the type of Industrial Ethernet protocol and load the corresponding industrial application into the Sitara processor during runtime. This TI Design introduces PRU-ICSS's multi-protocol Industrial Ethernet protocol detection firmware.

Schematic PCB

Automotive-grade 77GHz radar module reference design with target data output

The TIDA-01570 reference design is a complete solution for 76 to 81GHz radar sensor modules. The onboard power supply converts the vehicle battery input to the power rails required by the radar AFE, processor and CAN-FD transceiver. After processing, the target data is made available via the included CAN-FD physical layer.

Schematic PCB