This reference design provides design guidelines, data and other content for a constant current 100W power supply for LED lighting with PFC and wide input voltage range (i.e. AC 90V to 264V).
This is a very simple open source scanning laser rangefinder. It uses triangulation. Its components cost less than $35 (excluding shipping). This lidar is very useful in robotics - for SLAM and navigation tasks.
The BATT-14AAAPACK is a configurable battery pack that can power the MC33771 or MC33772 evaluation board.
This reference design demonstrates an interface implementation to multiple high-voltage bipolar input, 8-channel, multiplexed input SAR ADCs (6) via a Sitara Arm processor using a Programmable Real-Time Unit (PRU- ICSS) expands the number of input channels. The ADCs can be configured so that the same channels can be sampled simultaneously across all ADCs. This design highlights the PRU-ICSS's ability to handle a data rate of 1536ksps (each sample = 16 bits) (640 samples sampled per line cycle). For a 50Hz period, this equates to 32ksps per channel between 6 ADCs simultaneously (640 samples/period*50Hz*6 ADC*8 channels = 1536ksps). In addition, a second PRU is used to post-process the data to achieve coherent sampling.
The PMP11769 reference design is a comprehensive solution for 700W automotive audio amplifiers. This boost converter provides a 36.0V, 10.0A continuous/20.0A peak output from an input voltage of 9 to 16V. It contains two Class D amplifiers delivering 2 x 175W (loaded into 4 ohms, left and right channels) and 1 x 350W (loaded into 2 ohms, subwoofer) power.
This reference design for a 6A step-down LED driver is based on the MAX16821 device. This circuit drives a single LED. This design includes the circuit specifications, circuit schematic, and circuit description and performance.
This fully tested, USB power delivery reference design is a high efficiency, high power density, AC/DC adapter solution with a wide input voltage range (85 - 265VAC) for laptop adapters and smartphone charger applications. It adopts active-clamp-flyback topology controlled by TI’s newest ACF controller UCC28780 as the mainly power supply stage. This design uses TPS25740B, TI’s PD source controller, to achieve a full PD 2.0 function. The design achieves a peak efficiency of 94% at a very high switching frequency. The design’s power density is increased to 30 W/in3, which is much higher than traditional solutions.
Several 51 chips were also used in the design.
16-bit industrial, isolated voltage and current output DAC, also provides isolated DC-DC power supply
Low Standby Current, Non-Isolated Flyback Power Supply Using LinkSwitch-TN2 (LNK3202D)
The RDGD3100I3PH5EVB power inverter reference design features the GD3100 advanced IGBT/SiC gate driver for high voltage 3-phase EV motor control.
The KITFS6522LAEEVM evaluation board demonstrates the functionality of the MC33FS6522 supporting CANFD & LIN, Vcore SMPS regulator up to 2.2A. These safety SBCs target the ISO26262 automotive functional safety standard.
The MAXREFDES71# subsystem reference design has two high-speed and high-accuracy analog inputs and analog outputs for industrial motion control applications. Hardware, firmware, design files, and lab measurements provide complete system information for rapid prototyping and development.
Now, through the Internet of Things (IoT) environment, many products have become "at your fingertips", including test equipment such as digital multimeters (DMMs). The TIDA-01012 reference design, implemented on Texas Instruments' SimpleLink™ ultra-low-power wireless microcontroller (MCU) platform, demonstrates a 4.5-digit, 100kHz connected true RMS digital multimeter , featuring Bluetooth Low Energy connectivity, NFC Bluetooth pairing® and auto-wake up with TI's CapTIvate™ technology.
The PMP40069 reference design is for portable DLP Pico projectors. It also comes with a 3-cell battery charger. The battery powers the projector when the adapter is unavailable. This solution implements the DLPA3000 PMIC/LED driver, DLPC3438 display controller and SMBus battery buck/boost charge controller BQ25700A. DLPA3000 PMIC is a fully integrated dedicated PMIC/LED driver that meets various system analog power requirements and can drive 0 ~ 6A RGB LEDs. The buck/boost charger is compatible with 5/9/12/15/20V output adapters. The charger is highly efficient and can provide 3A charging current for 3 batteries.
60 W isolated flyback adapter with StackFET™ using MinE-CAP ICs to achieve the highest possible power density and design simplicity
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
