20 W, 460-540 MHz evaluation board based on PD55025-E

20 W/460 - 540 MHz evaluation board based on PD55025-E

Schematic PCB

OM6273: SC16IS752/762 - SPI/I ² C to Dual UART/IRDA/General IO

OM6273 is a demonstration board for SC16IS752/762. SC16IS752/SC16IS762 is an I ² C bus/SPI bus interface to a dual-channel high-performance UART , providing a maximum data rate of 5 Mbit/s, low operating and sleep current; it also provides 8 additional programmable I/O pins for applications foot.

IoT node reference design supporting Wi-Fi® functionality and NFC connection switching

Configuration of Wi-Fi network connection parameters in embedded applications can be completed with a simple tap using NFC technology. This reference design illustrates how to perform NFC connection switching (pairing) and URL sharing on a Wi-Fi node using the TM4C1294 high-performance microcontroller, the CC3100 network processor, and the TRF7970A NFC transceiver or RF430CL330H NFC transponder.

Schematic PCB

OM14500-TJA1102: Evaluation Board, TJA1102HN 100BASE-T1 Automotive Ethernet PHY

Low-cost 2.5KV USB power isolation solution (schematic + BOM + gerber, etc.)

This is a low-cost isolation achieved through a power transformer. Since the transformer is more convenient for AC isolation, but DC is not suitable, ATtiny412 is specially used for control.

Schematic PCB

110/220VAC optically isolated zero-crossing detector module for DIN rail bracket mounting with 3.3V or 5V output - ideal for Arduino, ESP32/ESP8266

Detects Zero Cross point of AC supply (110/220VAC) and outputs a 1ms square pulse at 3.3V or 5V. 72mm x 20mm for DIN rail carrier mount.

Schematic PCB

1 W/380 - 520 MHz Evaluation Board based on PD84001

Schematic PCB

OM13318: NVT2002DP Demonstration Board

The NVT2001GM (OM13315) and NVT2002DP (OM13318) demonstration boards are designed to evaluate NXP's single or dual-channel bidirectional voltage level translators.

Development board based on MP34DT01-M digital MEMS microphone

Microphone add-on board based on MP34DT01-M digital MEMS microphone

Schematic PCB

450 W/1.8-54 MHz reference design based on 2xSD2943

450 W / 1.8 - 54 MHz reference design based on 2xSD2943

Schematic PCB

OM13516UL: PCF85263B evaluation board

The NVT4556 device is used to connect the SIM card to a low-voltage host-side interface.

Automotive Ethernet 100BASE-T1 PHY Customer Evaluation Board

Schematic PCB

DEVKIT-COMM: Development board adapter for CAN/LIN communication expansion

DEVKIT-COMM is a hardware plug-in adapter board that supports up to 4 additional CAN and 6 additional LIN/SCI connections when plugged into the MCU DEVKIT:

Schematic PCB

OM13313: TDA5051A PLM Demonstration Board Kit

TDA5051A PLM Demonstration Board Kit

Microphone evaluation board based on IMP34DT05 digital MEMS

Microphone add-on board based on IMP34DT05 digital MEMS

Schematic PCB

5509A recording schematic diagram

Schematic PCB

KIT33972AEWEVBE: Evaluation Kit-33972, MSDI with Wake Suppression

KIT33903BD3EVBE: Evaluation Kit - MC33903BD3, 2nd Generation SBC with CAN and LIN

You can use this evaluation board to implement the functionality of the MC33903D3 system basis chip (SBC).

CANFDuino: The best platform for open source, CAN-bus Arduino projects

CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.

Schematic PCB

8W/400-470 MHz RF Evaluation Board based on PD54008L-E

8 W/400 - 470 MHz evaluation board based on PD54008L-E

Schematic PCB