Wifi jammer: esp8266 wifi jammer

I have made esp8266 wifi jammer

Schematic PCB

Ardufocus-DRV8825: Precise open source focus controller

Ardufocus is the only OSS/OSH controller to support two independent focus motors, the high-resolution mode allows for stepwise sub-micron movements, multiple acceleration profiles, and it never forgets the focuser position between restarts.

Schematic PCB

Robot control board

2 Layers PCB 54.6 x 90.2 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen;

Schematic PCB

Portable wireless touch remote control

A tiny potable remote that can be customized to do different tasks using touch functionalities of ESP32

Schematic PCB

Prototype boards for ESP8266, ESP32 and ESP32-S2 modules

This is a prototype board for use with ESP8266, ESP32 and ESP32-S2 modules. The board is divided into areas that can be cut and then put together to build advanced IoT prototypes. After cutting as shown in the picture, you can start assembling the IoT device.

Schematic PCB

10x10x10 LED cube

The project is a cube shaped 10x10x10 LED matrix controlled by a serial interface.

Schematic PCB

Wheelbot open source unicycle (schematic, PCB, source code, etc.)

This open source ferry robot has unique functions such as the anti-interference standing ability of a tumbler and automatic roll-up.

Schematic PCB

DC 300V input BLDC motor without Hall control circuit using TPD4204F

This reference design provides design guidelines, data, and other content for a DC 300V input BLDC motor Hall-less control circuit using intelligent power devices. It implements vector control using an MCU designed specifically for motor control.

Schematic PCB

3D printed portable wind turbine

The wind turbine is mainly 3D printed and equipped with a BLDC motor as a generator. Foldable and no larger than 2L soda bottle. Easy to replicate and low cost to manufacture.

Schematic PCB

Starfish: an open source project for motor control board using component pick-and-place of RP2040 and TMC2209

Starfish is a pick and place machine control board built on the Raspberry Pi RP2040 microcontroller and Trinamic TMC2209 motor driver. This control board has some similarities to a 3D printer control board, but it has some unique issues to solve—including controlling solenoids and communicating with vacuum sensors. All board information is open source, and detailed explanations are provided to help you copy successfully.

Schematic PCB

VESC – Benjamin’s open source brushless motor driver (schematic, PCB, firmware, tool software, etc.)

ESC is the abbreviation of Electric Speed ​​Controller, that is, electronic speed controller, or ESC for short. The author is Benjamin Vedder, so it is called VESC. You may have heard of it, which is Benjamin ESC. This project is mainly divided into several parts, VESC firmware, bill of materials, VESC hardware, and VESC tool software. It is a very complete software and hardware project, and the supporting software is also excellent.

Schematic PCB

Based on ST ST25RU3993 unmanned convenience store ultra-high frequency UHF RFID reader solution

Schematic PCB

20 ink screen daisy chain gameplay

Created a daisy chain through the serial port

Schematic PCB

NHS3100 Starter Kit for Treatment Adherence

Schematic PCB

PNEV5190MB NFC module

Schematic PCB

Based on the portable soldering iron open source system IronOS, download the full set of open source materials for Pinecil V1 (software, hardware, etc.)

The portable soldering iron launched by PINE64 in the early days was based on the GD32 design. This time it was upgraded to the second generation product, which was changed to the domestically produced BL706. Its feature is that it supports low-power Bluetooth. The Bluetooth OTA upgrade function will be added to IronOS later. IronOS supports a variety of portable DC, QC, and PD powered soldering irons, and supports all standard functions of smart soldering irons.

Schematic PCB

Software and hardware open source portable monitor CatSniffer (schematic diagram, PCB, source code, etc.)

This board is a Swiss Army Knife for IoT security researchers, developers, and enthusiasts. The board can be used with different types of software, including third-party sniffers such as SmartRF Packet Sniffer, Sniffle, zigbee2mqtt, Z-Stack-firmware, Ubiqua Protocol Analyzer, our custom firmware, or you can even Specific software requires writing your own software.

Schematic PCB

Boston Dynamics Big Dog’s quadruped robot, open source BLDC motor controller MOTEUS (upgraded version, including firmware, PCB, etc.)

Both software and hardware are fully open source. The control board is designed based on STM32G4. This upgrade adds a flexible I/O subsystem and expands the types of feedback encoders and peripherals that the controller can receive.

Schematic PCB

Tah: Arduino-compatible BLE platform, which can be used as beacons, microcontrollers and HID devices (including schematics, source code, etc.)

Tah - Control anything from your smartphone, open source, Arduino-compatible Bluetooth Low Energy (BLE) platform that can be used as a beacon, microcontroller, and HID device.

Schematic PCB

Tarocco: Open source closed-loop motor controller for non-small machines (including firmware, PCB, etc.)

Desktop CNC machines often use stepper motors, often because they do not require position feedback sensors, thus reducing system cost. But there are situations where a position feedback sensor is needed or necessary, and the power output of a stepper motor, especially at high speeds, becomes a bottleneck for those who want a better performing machine.

Schematic PCB