The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.
NXP is launching a Generation 2 USB Type-C Shield with display port alt mode support! The NXP Generation 2 USB Type-C shield works with the MCUXpresso SDK and USB Power Delivery stack to allow you to connect USB Type-C Connectors to select Kinetis®, LPC and i.MX RT development platforms.
The PTN3356 demonstration board provides a simple interface between a host system with a DisplayPort connector and a monitor with a VGA connector.
OM6273 is a demonstration board for SC16IS752/762. SC16IS752/SC16IS762 is an I 2 C bus/SPI bus interface to a dual-channel high-performance UART , providing a maximum data rate of 5 Mbit/s, low operating and sleep current; it also provides 8 additional programmable I/O pins for applications foot.
The PTN3460/3460I demonstration board provides a simple interface between a host system with a DisplayPort connector and an LCD panel with LVDS signal input.
Evaluate USB Type-C CC control logic in DFP and UFP (or DRP) configurations. Also included is the PTN36043 USB3.0 SuperSpeed redriver.
TDA5051A PLM Demonstration Board Kit
The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.
OM13541UL is designed to evaluate the NXP PCAL6534. The PCAL6534 is a 34-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the Fast Mode (Fm+) I²C-bus interface. The ultra-low voltage interface allows direct connection to microcontrollers operating with voltages as low as 0.8 V.
The NVT2001GM (OM13315) and NVT2002DP (OM13318) demonstration boards are designed to evaluate NXP's single or dual-channel bidirectional voltage level translators.
The KIT33660 evaluation board supports the MC33660. The MC33660 is a serial connection bus interface device that provides bidirectional communication for automotive diagnostic applications.
Universal 8-bit general-purpose IO daughter board for Fm+ development board
The PCA21125 is a CMOS1 real-time clock (RTC) and calendar ideal for low power applications with operating temperatures up to 125 °C.
The OM14500/TJA1100 is designed for rapid evaluation of the TJA1100HN PHY. It has direct access to MDI and MII/RMII interfaces and chip configuration bits
The NVT4556 device is used to connect the SIM card to a low-voltage host-side interface.
OM13543 is designed to evaluate the NXP NTS0304E, a family of 4-bit dual supply conversion transceivers with automatic direction sensing that supports bidirectional voltage level translation.
OM14510/SJA1105TJP is an application board used to evaluate SJA1105EL and SJA1105TEL
The PCA8565 is a CMOS1 real-time clock and calendar suitable for low power applications. Programmable clock output, interrupt output, and undervoltage detector are also provided.
OM13526UL is a PCAL6524 24-bit general-purpose IO evaluation board that enables bidirectional voltage level conversion and GPIO expansion.
The USB Type-C Shield expansion board for Kinetis Power Delivery SDK provides a Type-C connector for any Kinetis development platform.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
