DEVKIT-COMM: Development board adapter for CAN/LIN communication expansion

DEVKIT-COMM is a hardware plug-in adapter board that supports up to 4 additional CAN and 6 additional LIN/SCI connections when plugged into the MCU DEVKIT:

Schematic PCB

OM13313: TDA5051A PLM Demonstration Board Kit

TDA5051A PLM Demonstration Board Kit

ETRX2-PA and ETRX2HR-PA ZigBee® Module Product Brochure

This document describes the Telegesis ETRX2-PA ZigBee module, which is designed to be integrated into another device and provide a fast, simple and low-cost wireless mesh network interface. Unless explicitly stated, the content also applies to ETRX2HR-PA modules that use a Hirose U.FL coaxial antenna connector in place of the onboard ceramic antenna. Users cannot convert ETRX2-PA to ETRX2HR-PA or vice versa. The Telegesis ETRX2-PA module is based on the Ember ZigBee platform, which consists of the single-chip EM250 and the EmberZNet mesh stack compliant with the ZigBee PRO standard. Integrating the simple-to-use AT style command interface and advanced hardware design, a wide range of applications can be easily implemented. Configurable functionality often allows the use of the ETRX2-PA wireless mesh module without the need for an additional host microcontroller, saving even more integration time and cost. In addition to the Telegesis AT command set, the ETRX2-PA can be used with custom built firmware or the Ember EZSP based UART protocol interface... No RF experience or expertise is required to add this powerful wireless networking capability to our of products. ETRX2-PA offers fast integration opportunities and the shortest possible time for marketing your products.

Schematic PCB

Microphone evaluation board based on IMP34DT05 digital MEMS

Microphone add-on board based on IMP34DT05 digital MEMS

Schematic PCB

EM34X Voice Remote Control Reference Design

Schematic PCB

KIT33972AEWEVBE: Evaluation Kit-33972, MSDI with Wake Suppression

KIT33903BD3EVBE: Evaluation Kit - MC33903BD3, 2nd Generation SBC with CAN and LIN

You can use this evaluation board to implement the functionality of the MC33903D3 system basis chip (SBC).

CANFDuino: The best platform for open source, CAN-bus Arduino projects

CANFDuino supports CANFD, the latest version of the CAN bus standard, which can accommodate speeds up to 5 Mbps. It has two local ports with DB9 connectors in a housing that can be mounted on your vehicle or installed in your own projects. The platform is designed for tinkerers, hackers, and industry professionals looking for a ready-made, open source CAN bus solution that requires little or no hardware assembly.

Schematic PCB

8W/400-470 MHz RF Evaluation Board based on PD54008L-E

8 W/400 - 470 MHz evaluation board based on PD54008L-E

Schematic PCB

KIT33978EKEVB: Evaluation Kit - MC33978, 22-channel switch detection

PCF85063TP-ARD Evaluation Board

Schematic PCB

WS281x LED RS485 transceiver

2 Layers PCB 10 x 18 mm FR-4, 1 mm, 1, HASL with lead, White Solder Mask, Black silkscreen;Cofigurable RS485 TX-RX transceiver for long range serial LED strip communication

Schematic PCB

WT32 development kit design information

WT32 development kit design information

Schematic PCB

5 W, 740-950 MHz evaluation board based on PD84008L-E

5 W/740 - 950 MHz evaluation board based on PD84008L-E

Schematic PCB

Tigard: an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H

Tigard is an open source, multi-protocol, multi-voltage hardware hacking tool based on FT2232H. By combining commonly used pins, labeled harnesses, onboard level translation, and logic analyzer connections, it is specifically designed to connect to and communicate with low-speed interfaces on reverse-engineered hardware targets.

Schematic PCB

NB-IoT Internet of Things Development Platform

This platform integrates NB-IoT low-power networking capabilities and uses the powerful computing power of NuMicro® M487 to collect sensing data for analysis, obtain streamlined results, and then transmit them to the cloud in NB-IoT mode. It can also be used as a lightweight Gateway, transmits data between Ethernet, Wi-Fi and NB-IoT.

KIT33905D5EKEVBE: Evaluation Kit - 33905D5, 2nd Generation SBC with CAN and LIN

8W/400-500 MHz RF Evaluation Board based on PD55008-E

8W/400 - 500 MHz evaluation board based on PD55008-E

Schematic PCB

KITUSBSPIEVME: Evaluation Kit-USB-SPI Interface, MC68HC908JW32

MC33664ATL Isolated Network High Speed ​​Transceiver Evaluation Board

Schematic PCB