CN0340

True RMS RF detector with 95 dB detection range

Schematic PCB

Motor control system based on ADSP-CM408

For motor control systems, ADI can provide complete solutions covering all important devices in the signal chain. Related products include analog-to-digital/digital-to-analog converters, amplifiers, embedded processors, iCoupler® digital isolators and power management devices. These high-performance devices and increased system integration help achieve newer topology designs and bring value to customers' differentiated system designs.

Schematic PCB

2.5W Wireless Charging Transmitter Evaluation Kit

2.5 W Wireless Charging Transmitter Evaluation Kit

Schematic PCB

CN0235

Fully isolated lithium-ion battery monitoring and protection system

Schematic PCB

Evaluation board for ISOSD61 isolated sigma-delta converter

The EVALST-ISOSD61T is a full-featured evaluation board designed to allow the user to evaluate all the features of the ISOSD61 isolated analog-to-digital converter (ADC).

Schematic PCB

MAX2160 ISDB-T Reference Design

This reference design for the MAX2160 tuner plus demodulator IC demonstrates a compact daughter-board solution for the ISDB-T standard (single-segment). This design converts UHF band signals (470MHz to 770MHz) to a MPEG-2 transport stream. The solution is intended for portable applications, such as cell-phone TVs and PDAs.

CN0144

Using LO two-way modulator to build a wideband low-EVM direct conversion transmitter

Schematic PCB

Application circuit of low-power operational amplifier TC75S102F

Application circuit of low-power operational amplifier TC75S102F suitable for various sensors. These application circuits can be used in devices requiring long battery life, IoT sensors, energy harvesting systems, and more.

Schematic PCB

Motor current detection system solution based on ADSP-CM408 and AD7403

For small and medium power motor applications, the EPSH-MPC development platform provides current sampling of the isolated analog-to-digital converter AD7403. The external current loop is converted into a corresponding shunt voltage through a shunt resistor and input to the voltage test terminal of the AD7403. The AD7403 outputs according to the clock signal given by CM408F. ADC bit stream, CM408F enables the built-in SINC filter on the input bit stream to calculate the corresponding 16-bit ADC value, and stores the data into the corresponding ring queue through DMA. The host computer software can use the UART-USB port Or obtain the display of data samples through the RS485 port, you can intuitively see the acquisition effect of AD7403, and the collected data can be stored in an excel table to facilitate corresponding analysis of the data.

Schematic PCB

PF8100/PF8200 Customer Evaluation Board

The KITPF8100FRDMEVM and KITPF8200FRDMEVM are customer evaluation boards using the PF8100 and PF8200 power management ICs.

Schematic PCB

1.5W dual output buck demonstration board based on VIPER16LD

1.5W dual output buck demonstration board based on VIPER16LD

Schematic PCB

MAX2769 GPS Reference Design

This reference design is a complete RF front-end solution for a GPS receiver using Maxim's MAX2769 GPS receiver chip. The MAX2769 is a low cost, single conversion, low IF GPS receiver that offers two integrated LNAs with different specifications, I/Q channel filters with variable bandwidth and order, and a digital IF output that supports 1-bit and 2-bit operation. This reference design offers high performance, small size, and low BOM cost.

LFRD004: MAX7032 Transceiver Reference Design

This reference design provides a complete demonstration platform for using industrial/scientific/medical radio frequency (ISM-RF) products in a 2-way remote control (RC) application. This document includes the hardware, firmware, and system structure requirements for implementing a simple 2-way RC design.

Multi-phase energy measurement demonstration board with current transformer based on STPM33, STPM34 and STM8S903

Multiphase energy metering demonstration board based on STPM33, STPM34 and STM8S903 with current transformer

Schematic PCB

REP015: Tuning dual-channel CDMA PA to achieve high linearity

This reference design (RD) shows how a cellular-band, CDMA linear power amplifier (PA) can be tuned for high linearity and narrowband CDMA. This RD features the MAX2264 RF power amplifier which is designed for IS-98-based CDMA, PDC , and IS-136 TDMA. Schematics and test setup are shown.

Schematic PCB

TEA2095DB1574: Dual SR controller TEA2095 GreenChip add-on board for resonant power supplies

The TEA2095 add-on board is designed for incorporation into existing resonant power supplies by replacing the secondary rectifier diodes. The add-on board consists of the TEA2095 Dual SR controller IC and low-ohmic MOSFETs in LFPAK package.

Schematic PCB

Based on STNRGPF02 digital controller, 2kW dual-channel interleaved PFC reference design

2 kW two-channel interleaved PFC reference design based on the STNRGPF02 digital controller

Schematic PCB

12V, 150mA non-isolated step-down converter using VIPer™Plus-VIPER06XS

12 V/150 mA non-isolated step-down converter using VIPer™ Plus - VIPER06XS

Schematic PCB

Direct AC LED driver with Bluetooth wireless dimming control

200W Active Clamp Forward DC-DC Converter

This reference design provides design guidance, data, and other content for a 200W active-clamp forward DC-DC converter using N-channel MOSFETs as clamp switches.

Schematic PCB