To meet the increasing demands for isolated Power over Ethernet (PoE) power solutions, Maxim’s power supply experts have developed
The FRDM-K32L3A6 development board consists of the K32L3A6 device with 32 Mbit external serial flash memory, FXOS8700 accelerometer/magnetometer, visible light sensor, SDHC circuitry, universal LED and universal buttons, in the popular Freedom board format.
6.6 W non-isolated buck converter for small appliances using LinkSwitch-TN2 (LNK3207D)
TIDA-00675 reduces power consumption by using load switches to dynamically turn loads on/off. The design guide explains how switching frequency, duty cycle, and the use of discharge resistors affect power dissipation.
The TIDA-00486 TI design uses Texas Instruments' SimpleLink Wi-Fi CC3200 on-chip Internet wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with electrical isolation up to 2500 VRMS. The LM5160 Fly-Buck™ power supply provides both isolated and non-isolated 3.3V outputs for both parts of the circuit. This design can be powered by AC or DC supplies up to 30VRMS or 48V peak. A version of this design with a non-isolated RS-485 interface is included in TIDA-00485.
The 65W power adapter reference design is based on the EZ-PD™ PAG1s and PAG1P controllers. The solution complies with international energy efficiency standards including DoE Level 6/CoC Level 2 and passes conducted emissions testing as specified in the EN 55032 B standard. This solution is designed for use with USB-C PD (including PPS), QC power adapters. Adapters covering traditional charging protocols including Apple Charging, BC1.2, QC 3.0 and Samsung AFC are also supported. PAG1S and PAG1P together provide low BOM cost and high-performance solutions compatible with PD/PPS/QC.
The TIDA-01559 is a Human Machine Interface (HMI) reference design that uses the MSP430FR2522 MCU and LP5569 device, and can achieve extremely low standby power consumption and offload the resources of the MCU with LED engine control. This solution can be used anywhere a low-power consuming HMI with good EMI performance and moisture immunity is required. Examples are a kitchen exhaust hood, cooker top, and refrigerator.
This kit allows evaluation of the NHS3100 chip to monitor temperature and start the development of specific use cases. Firmware developed based on this starter kit is fully reusable in the final product, speeding time to market for temperature monitoring products.
The SBC-S32V234 is cost-competitive and small in size for secure, compute-intensive front-view, surround-view and sensor fusion applications
The MAX17595 is a peak-current-mode controller for designing wide input-voltage flyback regulators. The MAX17595 offers optimized input thresholds for universal input AC-DC converters and telecom DC-DC (36V to 72V input range) power supplies.
The PMP10748 is a complete automotive front-end protection TIDesign featuring TI's Zero IQ smart diode controller and high-side protection controller. This design utilizes two LM74610-Q1 ICs to drive 40V MOSFETs in an OR-ing configuration to provide reverse polarity protection. The LM74610-Q1 is a high-efficiency, zero-IQ alternative to lossy diode and inefficient PFET solutions, providing reverse polarity protection. The design also provides programmable OVP, UVLO and OCP through the LM5060-Q1 high-side protection controller. With the LM5060-Q1, this design not only has controllable rise time for safe connections, but also has programmable fault detection delay time.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
