Introduction: A Bluetooth music receiver based on the BTM334 module, which can also be used as a USB sound card
Introduction: Stereo audio DAC solution verification board based on ESS ES9023P
Introduction: CM6631A USB2.0 sound card interface card, size and main pin compatible with Amanero daughter card
Introduction: USB to serial port module based on CH9340K
Introduction: A portable headphone amplifier powered by USB
Introduction: Allwinner V3S main control, board shape and screw holes compatible with Raspberry Pi
Introduction: This project uses ESP32 master control and SHT31 temperature and humidity sensor.
Introduction: This project is based on esplay, and some components and circuits have been modified based on the original author's work.
Introduction: This is the self-assessment training of the 19th Guangzhou Institute of Navigation Electronic Information for the 2019 electronic competition retest questions. Review the use of operational amplifiers, RC circuits, NAND gates, etc. from this project, which is very comprehensive.
Introduction: Use justMLS, REW and other software to measure the impedance phase curve on the computer through the sound card, which supports up to 96KHz (sound card requiring 192KHz stereo input)
http://www.roomeqwizard.com/
Introduction: Full chip aluminum substrate mos output 1969, refer to the circuit design of this post http://bbs.hifidiy.net/thread-1157107-1-1.html, the measured performance is good, and the cost is also very low
Introduction: High-sensitivity AM SW FM radio with simple circuit and easy installation. Very suitable for DIY.
Introduction: [RA] Ink screen design based on Renesas MCU