Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications. However, the use of an optocoupler or an auxiliary winding on the flyback transformer for voltage feedback across the isolation barrier increases the number of components and design complexity. The MAX17690 eliminates the need for an optocoupler or auxiliary transformer winding and achieves ±5% output voltage regulation over line, load, and temperature variations.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.
Flyback converters are the preferred topology in isolated converters for medium and low power range applications due to their simplicity and economic considerations. As flyback converters are isolated converters, the output voltage and the current are traditionally regulated by utilizing the secondary side regulation (SSR) composed of an optocoupler and a secondary-error amplifier.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) via power-sourcing equipment (PSE) or midspan and has many advantages over traditional methods of power delivering. The MAXREFDES1148 reference design is a 36V~57V input to 5V/2.5A output flyback PoE PD power module to be used in Ethernet equipment that needs the 5V power supply to be isolated from the primary Ethernet power.
This design uses the MSP430F6736 device to implement a highly integrated single-chip energy metering (meter) solution. Hardware and software design files are provided to calculate various parameters of single-phase energy metering such as RMS current and voltage, active and reactive power and charge, power factor and frequency.
42 W Dual Port Isolated Flyback Power Supply with 30 W USB PD 3.0 and 12 W USB-A Port Using InnoSwitch3-Pro with PowiGaN Technology (INN3379C-H302)
The MAXREFDES1161 is a small form factor, high accuracy, 2-wire 4mA to 20mA transmitter which integrates all functional and protection blocks in a small 1.0in x 0.6in dual-row header footprint that is compatible with breadboards and off-the-shelf peripheral expansion boards.
Stackable monitors and protectors used in large lithium-ion batteries to provide monitoring, balancing and communication functions. Each bq76PL455A-Q1 EVM can manage 8 to 16 cells (12V minimum) in Li-ion battery applications. Up to 16 bq76PL455A-Q1 EVM modules can be stacked. The system provides fast cell balancing, diagnostic functions and modules for controller communication. An independent protection circuit is also integrated.
This is a reference design for a SEPIC/linear LED-display backlight driver for eight parallel strings of 8 WLEDs (white LEDs) at 70mA/string. The dimming ratio is 4000:1. The input voltage is 16V to 36V with 50V transients. The design combines a SEPIC switching power supply with adaptive feedback and linear current sinks for high dimming ratios. The MAX16809 16-channel LED driver is featured.
This 45W adapter reference board is designed to be a form, fit and functional test platform for low-cost charger applications to demonstrate the state-of-the-art 700V CoolMOS™ P7 Super Junction (SJ) MOSFETIPN70R600P7S in SOT-223 packaging. The reference adapter board is designed to fit into an extremely small form factor while featuring high efficiency, low standby power and various protection modes to achieve a highly reliable system. The board passes EMI (conducted and radiated), ESD immunity and surge testing and is ready for production after final verification by the customer with a small number of changes.
The NXP 15W multi-coil automotive transmitter solution is designed for in-vehicle wireless charging.
This design is a complete system for controlling a single extruder based 3-axis 3D printer. The system is managed by the MSP430F5529 LaunchPad and utilizes the DRV8846 for precision stepper motor control. The CSD18534Q5A is used as a low-side switch for warm bed heaters, extruder heaters, and cooling fans. The DRV5033 Hall sensor acts as a non-contact limit switch.
The MAX17681/MAX17681A is a high-voltage, highefficiency, iso-buck DC-DC converter designed to provide isolated power up to 5W. The device operates over a wide 4.5V to 42V input and uses primary-side feedback to regulate the output voltage .
This reference design boosts a single-cell battery voltage input to a 10W output using the MAX16990 controller in bootstrapped mode.
27 W USB PD 3.0 with PPS charger (5 V/3 A; 9 V/3 A; 3.3 V-11 V PPS outputs) using InnoSwitch3-Pro (INN3366C-H301) and VIA Labs VP302 USB PD controller, single-board design
This reference design uses multiple microphones, a beamforming algorithm, and other processes to extract clear speech and audio amidst noise and other clutter. The rapid increase in applications that are used in noise-prone environments for voice activated digital assitants creates demand for systems that extract clear voice from noisy environments. The reference design uses a microphone array and a sophisticated signal processing to extract clear audio from noisy environments.
To meet energy efficiency requirements, ceiling fans and ventilation fans will move from simple AC induction motors to brushless DC motors (BLDC). BLDC motors require AC-DC conversion with high efficiency and high power factor when operating on AC power. It also requires the use of highly efficient controlled inverters for low-noise operation. Reference design TIDA-00652 uses a single-stage power supply to convert an AC power input to a low-voltage DC output, helping meet the challenges of higher efficiency and power factor in a simpler way. It also incorporates a fully integrated and properly protected single-chip sensorless sinusoidal brushless motor controller for low-noise operation.
This EVK supports NXPMC33812. MC33812 is an engine control analog power IC suitable for motorcycle and single/double cylinder small engine control applications.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
