Introduction: This is an ESP32 mini development board imitating the Zhihuijun ESP32 development board, redesigned and equipped with a 0.96-inch 80*160 pixel color LCD screen MCU6050 attitude sensor VL6180 proximity sensor lithium battery charging and other functions.
Introduction: This is an ESP32-CAM camera module with one-click serial port download and burning function. The internal wiring pins are the same and the external expansion pins are slightly different.
Introduction: A multi-purpose speedometer developed based on ESP8266 chip
Introduction: eeprom 29 series programmer, read and write amic29 mx29 sst39 w29
Introduction: The arduino prototype expansion board is for standard uno size and can be stacked directly, avoiding the problem of laborious welding of pins and hole boards. Those with strong ability can directly build arduino on it.
Introduction: An 83-key keyboard based on Atmega32u4-au. I originally wanted to use the reverse L key to enter the Enter key. But I forgot to set the control of the balance bar, so I can only use the rectangular Enter key. Brothers who are interested can change this position by themselves.
Introduction: Sharing for personal use. I plan to make a tutorial later, so I called it this name.
Introduction: This project is an open source handheld console for ESP32S3. The original hardware design comes from the master pebri86's esplay_micro_hardware. The module is replaced with the new ESP32S3, part of the design is modified, and the screen is replaced with a 2.4-inch IPS ST7789V screen.
Introduction: This project is an open source mini game handheld machine using Espressif Systems ESP32. The hardware design is derived from the esplay_micro_hardware of the master pebri86, and is modified twice according to the Square open source project.
Introduction: ESP32 1.44-inch lvgl development board
Introduction: Hotkey keyboard with two rotary encoders and 8 keys
Introduction: The smallest intelligent voice assistant based on SU-03T
Introduction: This project is an upgrade based on the previous version of the weather clock. It is designed as a watch charging stand to continue to use waste heat.
Introduction: USB voltage and ammeter based on ESP-01S, size is 5x1.9x1.1cm.
Introduction: Change the open source project of GloomyGhost boss.
Introduction: Based on ESP32-pico-d4
Introduction: Ink screen driver board based on ESP8266
Introduction: The Raspberry Pi pico development board is made based on the official open source information. The original circuit is modified and upgraded. The overall dimensions and pin definitions are basically consistent with the official ones, and it perfectly adapts to the official expansion board.