The MAXREFDES1158 is a 5V supplied, 2.75kVRMS isolated, 500kbps, RS-485 module using the MAX14946. This reference design demonstrates how to build an isolated RS-485 module with a low-cost transformer to provide isolated power.
The MAXREFDES1160 is a 5V supplied, 2.75kVRMS, full-duplex and 500kbps isolated RS-485 module using the MAX14853. This reference design demonstrates how to build an isolated RS-485 module with a low-cost transformer to provide isolated power. A transformer from HanRun, the HR600755, is used in this design. The power supply on the reference design is derived from a single 5V source. Connect the design board to a USB port or connect an external supply from VDDA to GNDA to provide 5V power supply on the logic side (A). The integrated push-pull transformer driver and external transformer (TX1) generate an isolated supply for powering the isolated side (B) of the board.
The MAXREFDES174# is an IO-Link®-compliant, distance sensor reference design that uses the Maxim MAX22513 IO-Link device transceiver and supports the IQ2 Development IO-Link stack.
The MAXREFDES173# IO-Link® temperature sensor uses the MAX14827A IO-Link device transceiver and supports the IQ2 Development™ IO-Link stack.
The MAXREFDES145# is a fully IO-Link®-compliant, 8-port IO-Link master reference design. This design uses TEConcept's IO-Link master stack and is both an IO-Link master reference design as well as an IO-Link sensor /actuator development and test system. Eight IO-Link ports allow for simultaneous testing of up to eight different sensors (or actuators).
DEVKIT-COMM is a hardware plug-in adapter board that supports up to 4 additional CAN and 6 additional LIN/SCI connections when plugged into the MCU DEVKIT:
OM6270 is a demonstration board for SC16IS750. SC16IS740/750/760 is a slave I 2 C bus/SPI interface that connects to a single-channel high-performance UART .
You can use this evaluation board to implement the functionality of the MC33903D3 system basis chip (SBC).
The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.
NXP is launching a Generation 2 USB Type-C Shield with display port alt mode support! The NXP Generation 2 USB Type-C shield works with the MCUXpresso SDK and USB Power Delivery stack to allow you to connect USB Type-C Connectors to select Kinetis®, LPC and i.MX RT development platforms.
The PTN3356 demonstration board provides a simple interface between a host system with a DisplayPort connector and a monitor with a VGA connector.
OM6273 is a demonstration board for SC16IS752/762. SC16IS752/SC16IS762 is an I 2 C bus/SPI bus interface to a dual-channel high-performance UART , providing a maximum data rate of 5 Mbit/s, low operating and sleep current; it also provides 8 additional programmable I/O pins for applications foot.
The PTN3460/3460I demonstration board provides a simple interface between a host system with a DisplayPort connector and an LCD panel with LVDS signal input.
Evaluate USB Type-C CC control logic in DFP and UFP (or DRP) configurations. Also included is the PTN36043 USB3.0 SuperSpeed redriver.
TDA5051A PLM Demonstration Board Kit
The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.
OM13541UL is designed to evaluate the NXP PCAL6534. The PCAL6534 is a 34-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the Fast Mode (Fm+) I²C-bus interface. The ultra-low voltage interface allows direct connection to microcontrollers operating with voltages as low as 0.8 V.
The NVT2001GM (OM13315) and NVT2002DP (OM13318) demonstration boards are designed to evaluate NXP's single or dual-channel bidirectional voltage level translators.
The KIT33660 evaluation board supports the MC33660. The MC33660 is a serial connection bus interface device that provides bidirectional communication for automotive diagnostic applications.
Universal 8-bit general-purpose IO daughter board for Fm+ development board
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
