FRDM-KW36 is a development kit for the KW35/36 MCU that provides connectivity for Bluetooth Low Energy (BLE) v5. KW36 integrates CAN/CAN-FD connection.
DEVKIT-COMM is a hardware plug-in adapter board that supports up to 4 additional CAN and 6 additional LIN/SCI connections when plugged into the MCU DEVKIT:
QN9080SIP-DK is a development kit supported by the QN9080-001-M17 module, supporting Bluetooth 5 and NFC.
OM6270 is a demonstration board for SC16IS750. SC16IS740/750/760 is a slave I 2 C bus/SPI interface that connects to a single-channel high-performance UART .
You can use this evaluation board to implement the functionality of the MC33903D3 system basis chip (SBC).
The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.
NXP is launching a Generation 2 USB Type-C Shield with display port alt mode support! The NXP Generation 2 USB Type-C shield works with the MCUXpresso SDK and USB Power Delivery stack to allow you to connect USB Type-C Connectors to select Kinetis®, LPC and i.MX RT development platforms.
A complete hardware/software platform for building a new generation of connected smart products
Developer Starter Kit
Highly Scalable QN Wireless MCU Application Development Platform This development kit is enabled by the QN9090T which supports Bluetooth 5 and NFC.
OM6273 is a demonstration board for SC16IS752/762. SC16IS752/SC16IS762 is an I 2 C bus/SPI bus interface to a dual-channel high-performance UART , providing a maximum data rate of 5 Mbit/s, low operating and sleep current; it also provides 8 additional programmable I/O pins for applications foot.
Evaluate USB Type-C CC control logic in DFP and UFP (or DRP) configurations. Also included is the PTN36043 USB3.0 SuperSpeed redriver.
TDA5051A PLM Demonstration Board Kit
The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.
OM13541UL is designed to evaluate the NXP PCAL6534. The PCAL6534 is a 34-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the Fast Mode (Fm+) I²C-bus interface. The ultra-low voltage interface allows direct connection to microcontrollers operating with voltages as low as 0.8 V.
The NVT2001GM (OM13315) and NVT2002DP (OM13318) demonstration boards are designed to evaluate NXP's single or dual-channel bidirectional voltage level translators.
The KIT33660 evaluation board supports the MC33660. The MC33660 is a serial connection bus interface device that provides bidirectional communication for automotive diagnostic applications.
Universal 8-bit general-purpose IO daughter board for Fm+ development board
The OM14500/TJA1100 is designed for rapid evaluation of the TJA1100HN PHY. It has direct access to MDI and MII/RMII interfaces and chip configuration bits
OM13543 is designed to evaluate the NXP NTS0304E, a family of 4-bit dual supply conversion transceivers with automatic direction sensing that supports bidirectional voltage level translation.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
