SCD30-3d-model: 3d model of the SCD30 CO2 sensor

The design is a custom 3d model from Sensirion. Sensirion provides a 3d model, but it has very few features.

Schematic PCB

60 W USB-PD and Quick Charge 3.0 Buck-Boost Reference Design Documentation Package

BPW34 photodiode acts as a solar cell to make a supercapacitor watch (schematic diagram, etc.)

The standby time is acceptable and in good condition, more than 7 days.

Schematic PCB

CN0280

Integrated isolated power supply, powerful fully isolated current sensing circuit for solar photovoltaic converters

Schematic PCB

syzygy-epc901: SYZYGY and EPC901 CCD + 50MSps ADC

The EPC901 is a 1024x1 CCD sensor capable of providing 50MHz pixel output. It outputs analog voltage from the CCD element. The author paired it with a 50MSps ADC on a SYZYGY board. The datasheet says it can run up to 50k fps. External I/O is provided via optocouplers to facilitate connection to external trigger sources such as motion controllers. This board will assist in conducting experiments on the new PnP platform. Objects can be moved through the line scanner to capture the position of the photo.​

Schematic PCB

Intelligent Snowflake Ambient Light

Renesas is ready for the cold with a full lineup of power and analog components spec’d to operate down to -40 °C.

Schematic PCB

Electric vehicle power inverter control reference platform

NXP's ASIL-D automotive system platform is a reference design that enables high-voltage power inverter control to drive electric vehicle traction motors and DC-DC converters.

FPGA Power Solutions

Complete power solution for FPGAs

CN0183

Precision, 16-bit bipolar output voltage source using +12V to ±5V supplies

Schematic PCB

Smart and cool music flower-shaped lamp

Renesas’ flower reference design showcases a diverse portfolio of products for broad market applications. From power management to precision analog and specialty ICs, we've got you covered for your designs.

Schematic PCB

MAXREFDES1161#: Small size, high accuracy, 2-wire, 4mA to 20mA current loop transmitter

The MAXREFDES1161# is a small form factor, high accuracy, 2-wire 4mA to 20mA transmitter which integrates all functional and protection blocks in a small 1.0in x 0.6in dual-row header footprint that is compatible with breadboards and off-the-shelf peripheral expansion boards.

An open source project for underwater sensor nodes based on single-pair Ethernet technology SPE (from tutorial to actual combat, English)

Single-Pair-Ethernet technology (SPE, Single-Pair-Ethernet) describes the transmission of Ethernet through only a pair of copper cores. In addition to transmitting data through Ethernet, it can also simultaneously provide power to terminal devices through PoDL (power supply over data lines).

Schematic PCB

MAXREFDES1238: Scalable, single-input, 6-output, power supply solution for Version ACAP platform

In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from 500mW to 130W. The design is specified to meet the XILINX Versal ACAP AI Core Series UC1/3 requirements. The design layout is also optimized for the Versal ACAP IC.

Schematic PCB

For FXLN83xxQ NXPBreakout board for acceleration sensor

BRKOUT-FXLN83xxQ kit includesBreakout board for the FXLN83xxQ acceleration sensor series.

SimpleLink™ ZigBee® Network Range Extender Reference Design

ZigBee applications such as home and industrial automation, lighting, metering and sensor networks may require longer RF transmission range and higher sensitivity than the standalone CC2530. TI's new SimpleLink CC2530-CC2592 reference design pairs the cost-effective SimpleLink ZigBee CC2530 wireless MCU with the SimpleLink CC2592 range extender to improve receiver sensitivity by 2-3 dB and increase the total link budget to 120 dB, significantly improving Coverage of each node in the ZigBee network.

Schematic PCB

Reverse Power Supply - Eight Input Single Output Reference Design

This reference design is a power supply solution for reverse powered telecom applications. Up to 8 isolated inputs provide a universal output; the load is shared equally among all active converters.

Schematic PCB

KPower supply design for Kintex Ultrascale FPGA: ultra-quiet, 1.8V, 1A

This reference design provides a power-supply circuit with an input voltage of 3.3V, an output voltage of 1.8V, and an output current of 1A using the MAX8869 low-dropout linear regulator. The circuit was developed to power a MGTVCCAUX rail on a Xilinx® Kintex® Ultrascale™ FPGA. Included in this reference design are a schematic and a bill of materials.

Schematic PCB

Radiation Hardened FPGA Power Solution

Renesas Offers a Complete Solution for Powering Rad Hard FPGAs

Schematic PCB

Power supply design for Kintex Ultrascale FPGA: PMBus compatible, strictly regulated, 1.80V, 2A

This reference design provides a power-supply circuit with an input voltage of 10.8V to 13.2V, an output voltage of 1.80V, and an output current of 2A using the MAX15303 InTune™ Point-of-Load (PoL) Controller. The circuit was developed to power a VCC1V8 rail on a Xilinx® Kintex® Ultrascale™ FPGA. Included in this reference design are a schematic, applications information, and a bill of materials.

Schematic PCB

Electric vehicle charger schematic diagram (UC3842+LM324+TL431)

Electric vehicle charger schematic diagram (UC3842+LM324+TL431)

Schematic PCB