16-bit industrial, isolated voltage and current output DAC, also provides isolated DC-DC power supply
The RDGD3100I3PH5EVB power inverter reference design features the GD3100 advanced IGBT/SiC gate driver for high voltage 3-phase EV motor control.
The MAXREFDES71# subsystem reference design has two high-speed and high-accuracy analog inputs and analog outputs for industrial motion control applications. Hardware, firmware, design files, and lab measurements provide complete system information for rapid prototyping and development.
The KITFS6522LAEEVM evaluation board demonstrates the functionality of the MC33FS6522 supporting CANFD & LIN, Vcore SMPS regulator up to 2.2A. These safety SBCs target the ISO26262 automotive functional safety standard.
High Effi ciency Inkjet Power Supply Provides up to 80 Watts of Peak Power
0.48 W non-isolated power supply with lossless generation of AC zero-crossing signal using LinkSwitch-TNZ (LNK3302D)
This reference design demonstrates an ultra-low power capacitive touch panel solution powered by a single MSP430™ microcontroller (MCU) with CapTIvate™ technology. The use of self- and mutual-capacitance technology enables multifunctional capacitive touch panels (buttons and proximity sensors) to be used in electronic locks and other applications with various human-machine interfaces. This TI reference design also shows how to extend battery life by cyclically running the MSP430 CPU and switch between low-power and run modes.
60 W isolated flyback adapter with StackFET™ using MinE-CAP ICs to achieve the highest possible power density and design simplicity
Now, through the Internet of Things (IoT) environment, many products have become "at your fingertips", including test equipment such as digital multimeters (DMMs). The TIDA-01012 reference design, implemented on Texas Instruments' SimpleLink™ ultra-low-power wireless microcontroller (MCU) platform, demonstrates a 4.5-digit, 100kHz connected true RMS digital multimeter , featuring Bluetooth Low Energy connectivity, NFC Bluetooth pairing® and auto-wake up with TI's CapTIvate™ technology.
The TIDA-00195 reference design includes a 22kW power stage and TI's new reinforced isolated IGBT gate driver ISO5852S for motor control in a variety of applications. This design enables the performance evaluation of the ISO5852S in a three-phase inverter integrating an IGBT module with a rated voltage of 1200V and a rated current range of 50A-200A. Some of the important features and performances evaluated include short-circuit protection using DESAT detection, soft shutdown, effectiveness of active Miller clamping at different inverter dv/dt, and IGBT gate driver derived from adjustable speed electrical System-level ESD/EFT performance of electric drive systems (IEC61800-3). Piccolo Launch Pad LAUNCHXL-F28027 is used to generate the PWM signals required for inverter control.
This "RF Layout Reference Design" demonstrates excellent decoupling and layout techniques for low power RF devices in the 169 MHz band.
72 W ultra-compact charger/adapter for appliances and industrial applications
The TIDA00255 reference design utilizes the bq76940 analog front end (AFE) IC. It can measure battery voltage, mold temperature or external thermistor voltage using a 14-bit ADC. Current is measured individually by a separate 16-bit coulomb counter. The design turns off the low-side power FET to stop discharging or charging based on selected hardware limits. A microcontroller not included in this design will be part of the battery controller to communicate with the AFE to set protection thresholds, enable the power FETs, provide fault recovery, and shut down the FETs during over/under temperature conditions. Battery controller designs may include additional features that are not part of this reference design, such as secondary overvoltage protection, measurement, and isolated communications to inform the system of battery status.
The FRDMFS6523CAEVM evaluation module demonstrates the capabilities of the MC33FS6523, supporting CANFD & FS1B, Vcore SMPS regulators up to 1.5A.
Integrated device power supply (DPS) for automatic test equipment with output voltage range 0 V to 25 V
45 W USB PD 3.0 Power Supply with 3.3 V – 11 V / 5 A (45 W Power-limited) PPS Output Using InnoSwitch3-PD PowiGaN (INN3879C-H803)
TIDA-00709 is a 36W dual-output auxiliary power supply with universal DC input, targeting server and telecom power supplies. This reference design uses the UCC28740 constant voltage/constant current (CV-CC) flyback controller to implement a quasi-resonant (QR) flyback converter with optocoupled feedback for voltage and primary-side regulation for current ( PSR). To improve efficiency, the TIDA-00709 uses a synchronous rectifier with a synchronous controller UCC24636 and a low RDS(on) MOSFET to achieve a 12V_ISO/2.75A main output. This design is small and economical and has almost all necessary built-in protection mechanisms, such as protection against output overvoltage and short circuits. Additionally, the design features built-in electronic fuses for fault isolation on the 12V main output voltage rail without affecting any other outputs.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
