20 W direct AC LED driver analog and phase-cut dimming

75W Continuous Conduction Mode (CCM) Buck LED Driver

ASL5115EVBSLAV: MLC ASL5115SHN Evaluation/Development Board

The ASL5115EVBSLAV is a slave evaluation board for the MLC ASL5115SHN that works together with the ASL5115EVBMST to evaluate external lighting systems.

42 W high power factor constant voltage output flyback converter based on ICL8810

REF_ICL8810_LED_42W_PSR This 42 W reference design uses Infineon's high power factor flyback controller ICL8810. The evaluation board is a constant voltage (CV) secondary side regulation (SSR) system designed for use with a constant current (CC) converter for LED lighting applications.

Offline High Power Factor Triac Dimmable LED Driver GreenPoint® Reference Design

100W Quasi-Resonant (QR) Buck LED Driver

STR-NCS32100-GEVK: NCS32100XMNTXG Evaluation Kit

LED driver with phase-cut dimming, 40 W

43 W high power factor constant voltage output flyback converter based on ICL8810

REF_ICL8810_LED_43W_BM This 43 W reference design uses Infineon's high power factor flyback controller ICL8810. The evaluation board is a constant voltage (CV) secondary side regulation (SSR) system designed for use with a constant current (CC) converter for LED lighting applications. Two-stage topologies are becoming increasingly popular due to the easy scalability of primary-side power and secondary-side characteristics. The REF_ICL8810_LED_43W_BM solution features a plug-and-play design and can be used with the secondary-side DC/DC evaluation board. As a default, the reference design board is equipped with a depletion mode MOSFET BSS126I based startup circuit on a small adapter board. This setup will significantly reduce standby losses. If low standby power consumption is not required, the startup circuit can be changed to a resistive startup design. This reference design comes with two conditioning circuits. Both are plug-and-play solutions, but at least one circuit must be connected to the motherboard. There is a cost trade-off between the two evaluation boards; the TL431 evaluation board is lower cost and has good standby performance, while the op amp board exhibits excellent overall performance at the 30 mW power level. With its benchmark power factor correction and total harmonic distortion performance at full and light load conditions, the ICL8800 supports window driver and platform designs. In addition, the IC combines excellent efficiency with low EMI characteristics without compromising light quality.

ASL5015EVBMST: MLC ASL5015SHN Evaluation/Development Board

The ASL5015EVBMST is the main evaluation board for NXP's Matrix LED Controller (MLC) ASL5015SHN, which enables evaluation of external lighting systems.

20 WT Lamp Direct AC LED Driver with Analog Dimming

RDR-347 - 12.6 W, TRIAC Dimmable, Isolated Flyback, Power Factor Corrected (>0.97) LED Driver

Schematic PCB

PCA9959HN-ARD: Arduino^® Shield Board

NCV8415DTGEVB: Self-Protected Low-Side Driver with Inrush Current Management Demonstration Board

MT9V128IA3XTCH3-GEVB: VGA 1/4 SOC Marshall V-4301.9-2.0FT-IRC CIS HB Evaluation Board

SEC-6D6KW-OBC-TTP-GEVB: 6.6kW OBC evaluation board using totem pole topology

ASL5015EVBSLAV: MLC ASL5015SHN Evaluation/Development Board

1 W to 5 W MR16 LED Driver GreenPoint® Reference Design

NCV7707GEVB: Door Module Driver Evaluation Board

Schematic PCB

50 W constant voltage output driver