Flirting with jumper caps is a common practice on most boards, but not this board, which is designed to replace all those wires with an analog switch matrix. All one has to do is plug in the device and make a virtual connection on the accompanying GUI. There are also many built-in functions such as DAC and ADC, and the circuit can be switched under the prototype as needed. It also has some LEDs embedded in the breadboard area that light up and provide visual cues that they are connected to each other.
Quark based on ESP32 is an open source electronic tool that integrates electronic measurement probes and debugging tools. It has a wireless connection function and can be connected to APP.
There is a risk of electric shock and fire with this project! Light bulbs are essential devices in our lives. Incandescent and fluorescent light bulbs are typical light bulbs for household lighting fixtures. For industrial and public purposes such as street lighting, large indoor lighting, sports field lighting and any outdoor activities, apart from these bulbs, HID (High Intensity Discharge) lamps are also widely used. Typical HID lamps used for this purpose are high pressure sodium, metal halide, and mercury lamps. The last one has been banned in 2021 by the Minamata Convention on Mercury. Fixtures with incandescent and fluorescent bulbs, long used for home lighting, became obsolete within 10 years of the widespread adoption of LED lights, and currently offer only replacement bulbs. Low-wattage HID lamps are also gradually being replaced by LED lamps. High-wattage HID lamps still dominate the mainstream of large-scale lighting because the advantages of LED lamps at this level are smaller. Like many LED geeks, I built an LED fixture because it was rare, but when it became commonplace it stopped being fun. On the other hand, my nostalgia for the disappearance of glass tubes from our lives increased and I started collecting HID lamps as a light bulb geek. However, having only light bulbs makes no sense. In order to light a HID lamp, a lamp ballast rated for each bulb is required. Therefore, I designed and built an electronic HID ballast that can light a variety of HID lamps.
This is an original work by netizen jiezhi320 who participated in the RT-Thread application competition. In 2015, jiezhi320 made a version of hardware based on stm32f405rgt6. However, due to the high CPU usage of the UKF algorithm, the author migrated it to imx-rt1052, in order to leave enough resources for everyone to develop in-depth for model friends.
μSMUs are not meant to replace precision SMUs, but to complement them in cost-sensitive areas where accuracy is not required.
This design mainly explains the circuit and software design of the node equipment, coordinator equipment and gateway equipment in the greenhouse, completes the front-end and back-end interaction between the web page and the WeChat applet, and completes the data transmission test and communication distance test.
The portable soldering iron launched by PINE64 in the early days was based on the GD32 design. This time it was upgraded to the second generation product, which was changed to the domestically produced BL706. Its feature is that it supports low-power Bluetooth. The Bluetooth OTA upgrade function will be added to IronOS later. IronOS supports a variety of portable DC, QC, and PD powered soldering irons, and supports all standard functions of smart soldering irons.
Nowadays, almost all circuit boards use surface mount packaging, so I have always wanted to DIY a chip placement machine. After searching online for a long time, I finally decided to use the open source OpenPnP. The hardware and software are both open source.
CANable 2.0 is a small, low-cost, open-source USB to CAN adapter. CANable enumerates as a virtual serial port on your computer and acts as a serial line to CAN bus interface. Using the alternative candleLight firmware, CANable enumerates as a native CAN interface on Linux. CANable 2.0 supports standard CAN and CAN-FD.
The CANable adapter is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, BeagleBone, etc., making it ideal for integration into OEM products.
This is a very simple open source scanning laser rangefinder. It uses triangulation. Its components cost less than $35 (excluding shipping). This lidar is very useful in robotics - for SLAM and navigation tasks.
The SMU is a precision power supply device that can measure not only high-resolution voltage sources but also high-resolution current sources. It also integrates bipolar voltage and four-quadrant output functions to facilitate testing of various characteristics. By providing a linear sweep voltage and sweep current, the IV characteristic curve of the instrument can be obtained.
Dimebots are a group of autonomous, independent micro-robots that are as small as a dime, making them among the smallest robots in the world.
A distance monitor based on ESP8266 can remind people to maintain appropriate social distance at any time during the COVID-19 epidemic to prevent the spread of the virus.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
