Galvanically isolated 8-channel high-side driver based on ISO8200BQ
Smart curtain simulation design based on stm32, including source program and Proteus simulation files
Flexible, easy-to-use front-end development kit. It contains the PNEV5180B circuit board for EMVCo applications, antennas, NFC sample cards, etc.
High brightness LED driver based on ST1CC40 with suppression function, SO-8 BW package
A SOT-223 packaged CoolMOS™ CE superjunction MOSFET (IPN60R3K4CE) (600V, 3.4Ω) is used as the main switch for this single-ended cap T8 LED lamp driver board with high line output and 16W/66V output converter. The converter uses ICL8201 (SOT23-6-1) to achieve average current controlled non-isolated single-stage buck topology in a cascade structure LED driver. Unique features of this reference design include single-stage design for high efficiency and power factor, single choke (no auxiliary winding) critical conduction operation, true regulated output current over a wide output voltage range, and excellent EMI performance and various protection modes for high reliability and small size that easily fits into a standard T8 LED lamp single-ended cap.
Dual-channel colorimeter with programmable gain transimpedance amplifier and digital simultaneous detection
The KITPF8200FRDMPGM is a programming board with a 56-pin QFN socket that is compatible with all PF8100/PF8200 series devices. This kit integrates all the hardware required to program the OTP registers in the PMIC.
By CNC engraving a PCB in the following manner, the curved pad can perform capacitive sensing in 3 different directions and ultimately detect the 3D position of the finger.
1.5W dual output buck demonstration board based on VIPER16LD
Freedom-K64F is an ultra-low-cost development platform for Kinetis K64, K63 and K24 MCUs.
USB Type-C™ and USB Power Delivery evaluation kit based on automotive-grade SPC58 MCU and AutoDevKit development program
With the vigorous development of national real estate construction and the increase in construction projects, the problem of dust pollution caused by construction has become increasingly serious. In order to effectively and quickly monitor the dust conditions at the construction site, we use a hardware platform to collect dust PM2 at the construction site. 5/pm10 content information, the dot matrix screen displays the content information on site, and transmits the pm particulate matter (PM10/PM2.5) content information to the China Mobile OneNet platform through the GPRS network, and the dust regulatory authorities can view the dust content information through the platform. And it can be viewed through the mobile phone, which greatly facilitates the monitoring and control of dust pollution.
The P1022COME-DS is a QorIQ ® P1022 based COM express module with an onboard blade.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
