LFRD004: MAX7032 Transceiver Reference Design

This reference design provides a complete demonstration platform for using industrial/scientific/medical radio frequency (ISM-RF) products in a 2-way remote control (RC) application. This document includes the hardware, firmware, and system structure requirements for implementing a simple 2-way RC design.

TEA2206DB1583EVB: Active Bridge Rectifier Controller Demonstration Board

Schematic PCB

Motor control system based on ADSP-CM408

For motor control systems, ADI can provide complete solutions covering all important devices in the signal chain. Related products include analog-to-digital/digital-to-analog converters, amplifiers, embedded processors, iCoupler® digital isolators and power management devices. These high-performance devices and increased system integration help achieve newer topology designs and bring value to customers' differentiated system designs.

Schematic PCB

REP015: Tuning dual-channel CDMA PA to achieve high linearity

This reference design (RD) shows how a cellular-band, CDMA linear power amplifier (PA) can be tuned for high linearity and narrowband CDMA. This RD features the MAX2264 RF power amplifier which is designed for IS-98-based CDMA, PDC , and IS-136 TDMA. Schematics and test setup are shown.

Schematic PCB

Homemade flexible capacitive sensor

By CNC engraving a PCB in the following manner, the curved pad can perform capacitive sensing in 3 different directions and ultimately detect the 3D position of the finger.

Schematic PCB

CN0144

Using LO two-way modulator to build a wideband low-EVM direct conversion transmitter

Schematic PCB

Online dust monitoring system

With the vigorous development of national real estate construction and the increase in construction projects, the problem of dust pollution caused by construction has become increasingly serious. In order to effectively and quickly monitor the dust conditions at the construction site, we use a hardware platform to collect dust PM2 at the construction site. 5/pm10 content information, the dot matrix screen displays the content information on site, and transmits the pm particulate matter (PM10/PM2.5) content information to the China Mobile OneNet platform through the GPRS network, and the dust regulatory authorities can view the dust content information through the platform. And it can be viewed through the mobile phone, which greatly facilitates the monitoring and control of dust pollution.

Schematic PCB

Active Bridge Rectifier Controller Demonstration Board

Schematic PCB

CN0340

True RMS RF detector with 95 dB detection range

Schematic PCB

MPC5744P Functional Safety Motor Control Development Board

Schematic PCB

KITPF8200FRDMPGM: PF8200/PF8100 programming board

The KITPF8200FRDMPGM is a programming board with a 56-pin QFN socket that is compatible with all PF8100/PF8200 series devices. This kit integrates all the hardware required to program the OTP registers in the PMIC.

Schematic PCB

Direct AC LED driver with Bluetooth wireless dimming control

TEA2095DB1574: Dual SR controller TEA2095 GreenChip add-on board for resonant power supplies

The TEA2095 add-on board is designed for incorporation into existing resonant power supplies by replacing the secondary rectifier diodes. The add-on board consists of the TEA2095 Dual SR controller IC and low-ohmic MOSFETs in LFPAK package.

Schematic PCB

NHS3152TEMOADK: NHS3152 Universal Starter Kit

This kit permits to evaluate the NHS3152 chip and to start the development of a specific use case.

TWR-VF65GS10: VFxxx Controller Solutions Tower System Module

Schematic PCB

AT86RF231 PCB Antenna Diversity Reference Design

This reference design demonstrates a full-function network node with the AT86RF231 radio transceiver, which is capable of hosting a MAC layer implementation. Two ceramic chip antennas increase the link budget in a typical indoor scenario with multi-path fading effects.

Schematic PCB

FRDM-HB2001FEVM: Freedom Platform for HB2001, HQFN32 10 A H-Bridge, Programmable Brushed DC Motor Driver

The FRDM-HB2001FEVM evaluation kit allows users to practice using all features of the MC33HB2001 H-bridge device with FRDM-KL25z and SPIGen software.

Schematic PCB

TWR-KV11Z75M: Kinetis® KV1x FamilyTower® System Module

TWR-KV11Z75M is a development tool for Kinetis V series KV1x 64 KB and 128 KB series products, using ARM® Cortex™-M0+ processor.

Schematic PCB

PK-HCS08GB60: NXP MC9S08GB60 starter kit

Schematic PCB

Motor current detection system solution based on ADSP-CM408 and AD7403

For small and medium power motor applications, the EPSH-MPC development platform provides current sampling of the isolated analog-to-digital converter AD7403. The external current loop is converted into a corresponding shunt voltage through a shunt resistor and input to the voltage test terminal of the AD7403. The AD7403 outputs according to the clock signal given by CM408F. ADC bit stream, CM408F enables the built-in SINC filter on the input bit stream to calculate the corresponding 16-bit ADC value, and stores the data into the corresponding ring queue through DMA. The host computer software can use the UART-USB port Or obtain the display of data samples through the RS485 port, you can intuitively see the acquisition effect of AD7403, and the collected data can be stored in an excel table to facilitate corresponding analysis of the data.

Schematic PCB