MPC5746R Engine Management Evaluation System

Schematic PCB

MPC560xP Universal Evaluation System

Schematic PCB

20 W direct AC LED driver analog and phase-cut dimming

MPC5748G Security Gateway Evaluation Board

Schematic PCB

Direct AC LED driver with Bluetooth wireless dimming control

MTRCKTSBN5604P: 3-Phase Sensorless BLDC Development Kit with NXP MPC5604P MCU

TWR-S12G128: MC9S12G128 ultra-reliable 16-bit tower system module

TWR-S12G128 is for NXPDemonstration board for the MC9S12G128 automotive 16-bit MCU.

OM7809: BGU6102 Demonstration Board, 50 Ω FM Low Noise Amplifier, Embedded Antenna for Portable Applications

BGU6102 Unparalleled MMIC, Low Noise Amplifier for FM, ISM and LTE Bands

CN0147

Utilizing the ADP150 low-noise LDO regulator to power the ADF4350 PLL and VCO to reduce phase noise

Schematic PCB

RHYTHM SB3231 Behind the Ear Hearing Aid Reference Design 1.0

TWR-S08JE128: MC9S08JE Low Power USB Tower System Module

The TWR-S08JE128-KIT is a low-cost development tool for the MC9S08JE low-power USB microcontroller. The kit is part of the NXP Tower System, a modular, reconfigurable development platform that enables designers to accelerate time to market by packaging evaluation boards, tools and runtime software.

Offline High Power Factor Triac Dimmable LED Driver GreenPoint® Reference Design

AT86RF231 PCB Antenna Diversity Reference Design

This reference design demonstrates a full-function network node with the AT86RF231 radio transceiver, which is capable of hosting a MAC layer implementation. Two ceramic chip antennas increase the link budget in a typical indoor scenario with multi-path fading effects.

Schematic PCB

CN0340

True RMS RF detector with 95 dB detection range

Schematic PCB

S32V2 Vision and Sensor Fusion Evaluation System

Schematic PCB

MAX2830 WLAN Reference Design

This reference design is a complete RF front-end solution designed to meet the WLAN IEEE® 802.11b/g standard. Using the MAX2830 RF transceiver, the design is capable of accommodating full range of 802.11g OFDM data rates (6, 9, 12, 18, 24, 36, 48, and 54Mbps) and 802.11b QPSK data rates (1, 2, 5.5, and 11Mbps). This solution offers high performance, small size, and low BOM cost.

KEA128 Green Car Network

S32K148 Automotive Telematics Box (T-Box)

Schematic PCB

Motor current detection system solution based on ADSP-CM408 and AD7403

For small and medium power motor applications, the EPSH-MPC development platform provides current sampling of the isolated analog-to-digital converter AD7403. The external current loop is converted into a corresponding shunt voltage through a shunt resistor and input to the voltage test terminal of the AD7403. The AD7403 outputs according to the clock signal given by CM408F. ADC bit stream, CM408F enables the built-in SINC filter on the input bit stream to calculate the corresponding 16-bit ADC value, and stores the data into the corresponding ring queue through DMA. The host computer software can use the UART-USB port Or obtain the display of data samples through the RS485 port, you can intuitively see the acquisition effect of AD7403, and the collected data can be stored in an excel table to facilitate corresponding analysis of the data.

Schematic PCB

MAX2170/MAX2171 DAB/T-DMB Reference Design

The MAX2170/MAX2171 tuner plus demodulator IC reference design demonstrates a compact daughter board solution for DAB and T-DMB. The design converts VHF-III and L-Band signals to a MPEG-2 transport stream.