MPC560xB_EVB: NXPEvaluation board for MPC560xB

The XPC560B EVB is an NXP-enabledEvaluation system for the MPC560xB microprocessor.

RD33771CDSTEVB: MC33771C BCC evaluation board with isolated daisy chain communication

RHYTHM SA3229 Low-Cost Behind-the-Ear (BTE) Hearing Aid Reference Design

2018 Electronic Competition Question F-Wireless Microphone Amplification System (Harbin Engineering University)

Schematic PCB

EVAL_IPT015N10N5_TOLL: Infineon’s inverter-level solution for high-power motor control applications such as forklifts or low-speed vehicles

The 5kW evaluation board represents Infineon’s inverter-level solution for high-power motor control applications such as forklifts or low-speed vehicles. This reference design demonstrates the performance of Infineon's power MOSFET family OptiMOS™ in the new TO-Leadless package in terms of parallelization and thermal behavior.

CN0144

Using LO two-way modulator to build a wideband low-EVM direct conversion transmitter

Schematic PCB

PF8101/PF8201 Customer Evaluation Board

The KITPF8101FRDMEVM and KITPF8201FRDMEVM evaluation boards feature the PF8101/PF8201 energy management integrated circuit for high-performance processing applications

Schematic PCB

MTRCKTSPNZVM128: 3-Phase Sensorless PMSM Development Kit with S12 MagniV® MC9S12ZVML128 ^MCU

The S12ZVM series integrates all the elements needed to build a compact, energy-efficient 3-phase permanent magnet synchronous motor (or BLDC) motor control.

MAX2769 GPS Reference Design

This reference design is a complete RF front-end solution for a GPS receiver using Maxim's MAX2769 GPS receiver chip. The MAX2769 is a low cost, single conversion, low IF GPS receiver that offers two integrated LNAs with different specifications, I/Q channel filters with variable bandwidth and order, and a digital IF output that supports 1-bit and 2-bit operation. This reference design offers high performance, small size, and low BOM cost.

KIT33988CEVBE: Evaluation Kit - 33988, Dual 8mOhm High Side Switches

Motor control system based on ADSP-CM408

For motor control systems, ADI can provide complete solutions covering all important devices in the signal chain. Related products include analog-to-digital/digital-to-analog converters, amplifiers, embedded processors, iCoupler® digital isolators and power management devices. These high-performance devices and increased system integration help achieve newer topology designs and bring value to customers' differentiated system designs.

Schematic PCB

6.6 kW Onboard EV Charger Reference Design

MPC5744P Functional Safety Motor Control Development Board

Schematic PCB

CN0300

12-bit, 4-20mA loop-powered thermocouple measurement system using ARM Cortex-M3

Schematic PCB

TWR-S08RN60: 8-bit automotive tower module

The TWR-S08RN60 module is a development board for S08RN 8 automotive MCU.

KITPF8200FRDMPGM: PF8200/PF8100 programming board

The KITPF8200FRDMPGM is a programming board with a 56-pin QFN socket that is compatible with all PF8100/PF8200 series devices. This kit integrates all the hardware required to program the OTP registers in the PMIC.

Schematic PCB

ASL45XASLX41 Evaluation Board

The ASL45XASLX41 Evaluation Board (EVB) uses the ASL4500SHN and 2 ASL3416SHN devices to drive 6 independent LED strings.

REP015: Tuning dual-channel CDMA PA to achieve high linearity

This reference design (RD) shows how a cellular-band, CDMA linear power amplifier (PA) can be tuned for high linearity and narrowband CDMA. This RD features the MAX2264 RF power amplifier which is designed for IS-98-based CDMA, PDC , and IS-136 TDMA. Schematics and test setup are shown.

Schematic PCB

LFRD004: MAX7032 Transceiver Reference Design

This reference design provides a complete demonstration platform for using industrial/scientific/medical radio frequency (ISM-RF) products in a 2-way remote control (RC) application. This document includes the hardware, firmware, and system structure requirements for implementing a simple 2-way RC design.

LED backlight SEPIC driver

This is a reference design for a SEPIC/linear LED-display backlight driver for eight parallel strings of 8 WLEDs (white LEDs) at 70mA/string. The dimming ratio is 4000:1. The input voltage is 16V to 36V with 50V transients. The design combines a SEPIC switching power supply with adaptive feedback and linear current sinks for high dimming ratios. The MAX16809 16-channel LED driver is featured.