S32R29-EVB: Radar MCU Evaluation Board

RDDRONE-T1ADAPT: Ethernet media converter for drones, rovers, mobile robots and cars

ADTJA1101-RMII: TJA1101 Automotive Ethernet Adapter for S32K148EVB and i.MX8

S32K14WEVB-Q064: S32K144W evaluation board

DVB-T reference design based on MAX3580

OM13534: SA605DK Evaluation Demonstration Board

PROMETEO: Portable Diagnostic Tool for Automotive Ics

Schematic PCB

900MHz full-duplex wireless transmitter reference design

This reference design covers the design of a transmitter inside a 900MHz full-duplex radio using the MAX2902 single-chip transmitter. The MAX2902 is designed for use in the 868MHz to 915MHz frequency band, and complies with FCC CFR47 part 15.247 902MHz to 928MHz ISM band specifications. The reference design is capable of delivering more than +19dBm with V _CC = 2.9V and I _CC = 170mA, and +20dBm with V _CC = 3.3V and I _CC = 190mA, while meeting 14dB of CNR (1.22Mbps BPSK) at 10:1 VSWR (all angles).

Designing robust, fault-tolerant motion control feedback systems

This article reviews basic servo systems and development of the fault-tolerant feedback systems for servo systems. Controller receiver circuit design, proper PC-board receiver circuit layout, and the encoder's signal cable and termination are discussed. Additionally, various types of industrial feedback encoders are presented, along with the various types of faults that can develop in a servo feedback system.

CN0178

Software calibrated 50 MHz to 9 GHz RF power measurement system

Schematic PCB

REP010: Dual-band IS-136 front-end IC operating at 183MHz IF

This reference design (RD) is for a dual-band CDMA front-end in an IS-136 TDMA receiver with all 183MHz IFs, The RD uses the MAX2338, a low-noise amplifier (LNA) with mixer that is useful for TDMA, GSM, EDGE, and WCDMA applications.

Schematic PCB

LED driver with phase-cut dimming, 8.6 W

S32K-ISELED LED lighting solution

CN0294

Increase the number of clock source outputs using low-jitter LVPECL fanout buffers

Schematic PCB

FRDM33772BTPLEVB: MC33772 evaluation board with isolated daisy chain communication

6-Channel Li-Ion Battery Controller MC33772 Evaluation Board Targets Automotive and Industrial Applications with Isolated Daisy-Chain Communication

802.11b/g RF front-end module reference design using the MAX2830

This module uses the highly integrated MAX2830 RF transceiver. It is a complete RF front-end solution that meets the WLAN IEEE^SM 802.11b/g standard. The transmitter can deliver more than 15dBm Tx power at EVM < 5.6% with a 54Mbps OFDM 802.11g signal. The receiver can provide an IQ signal EVM < 9% with a -74.5dBm 54Mbps OFDM 802.11g signal.

OM13532: SA616BS Evaluation Demonstration Board

KIT09XS3400EVBE: Evaluation Kit - MC09XS3400, Quad Channel High-Side Switch

RD-IMX6Q-SABRE: SABER board based on i.MX 6Quad ​​application processor for smart devices

The SABER board for smart devices is based on the i.MX 6Quad ​​processor and supports 4-core processing, low-power multimedia and graphics applications.

MAX3541 DVB-T/PAL Tuner

The MAX3541 is an integrated, single-conversion terrestrial tuner IC for DVB-T and PAL. The device is designed to convert input signals in the VHF-Low, VHF-High, and UHF bands to an IF frequency of 36MHz. The MAX3541 is designed for television, analog/digital terrestrial receiver, and digital set-top box applications.