PC-based temperature measurement system reference design

This application note is a reference design for a PC-based temperature measurement system. It uses the MAX1396 and MAX6603EVKITs, a MAXQ2000 microcontroller, and MAX6603 signal conditioner. The design presents an easy way to obtain the temperature readings from the MAX6603 without requiring complicated conversion formulas. Schematics, block diagrams, and software are all provided.

Class D, 2.1-channel audio amplifier reference design for MP3 player docking station

This reference design demonstrates the use of the MAX98400 Class D audio amplifier in a stereo audio docking station application. The MAX98400 2.1 demo box is a complete powered speaker dock that uses two MAX98400 ICs to drive a 3-channel speaker system consisting of two 2in satellite speakers and one 5in subwoofer. The reference design is intended to be used with a portable audio player as its main music source. The overall solution size is very compact and features active equalization, power-supply monitoring, and dynamic equalization for the subwoofer.

HCS12DT256SLK: 16-bit HCS12DT256 student learning kit

Study kit for 16 HCS12 students

Storage oscilloscope, fully functional and verified, for graduation project

Storage oscilloscope, fully functional and verified, for graduation project

Schematic PCB

MAXREFDES72#: PMOD adapter for ARDUINO platform

The MAXREFDES72# reference design is a software configurable interface adapter that allows Pmod boards to be connected to Arduino headers. This board addresses the level shifting and pin multiplexing challenges associated with adapting these different interfaces.

Schematic PCB

KITMPL115A: Digital Air Pressure Sensor Evaluation Board

barometer altimeter pressure sensor

OM13502: PCA2117 Demonstration Board

PCA2117 Demonstration Board

PAS08P40B3256E: HC08 and S08 programming adapter

10x10cm 1.27mm perforated board

2-layer PCB 100 x 100 mm FR-4, 0.8 mm, 1, tinned with leads, green solder mask, white silkscreen;

Schematic PCB

High performance, high accuracy, 4–20mA current loop transmitter for industrial needs

This reference design shows how to develop a high-performance, high-voltage 2- or 3-wire 4–20mA current-loop transmitter suitable for industrial process control and smart sensors. Error analysis and overtemperature characterization data as well as hardware design and software are provided.

FRDM-SFUSION: Sensor Fusion Development Kit

MC33696EVB: MC33696/MC33596 Evaluation Board

The MC33696/ MC33596 development board is designed to work in conjuntion with the MC9S08RG60 demo boards at a range of frequencies including 315MHz, 433MHz and 868MHz

10KHz-30MHz Mini WIHIP AKTIF Antenna

10KHz-30MHz Mini WIHIP AKTIF Antenna

Flexible PCB with three buttons

1 Layers PCB 11 x 48 mm Polyimide Flex, 0.1 mm, 1, Immersion gold (ENIG), Yellow Solder Mask, White silkscreen;

Schematic PCB

FORmod - FORD S/S DRIVE MODE

A simple circuit to disable automatic start-stop and set the default drive mode on a Ford vehicle.

Schematic PCB

Output capacitor bank for signal power or dual supply headphone amplifier

This is a simple output capacitor bank for use in signal powered or dual supply headphone amplifiers. The output capacitor bank protects the headphones from DC current.​

Schematic PCB

Escorna CPU 2.12: An open source hardware project geared towards robotics and programming for kids.

The basic Escornabot can be programmed to perform a series of actions using the robot's buttons. From this point of view, imagination is the only limit on possibility.

Schematic PCB

3dfx Voodoo Memory Expansion Board - Revision 1.0

PCB for clipping onto Guillemot MAXI Gamer 3D Voodoo graphics accelerator. The common memory size for these cards is 4 MB. With the help of PCB you can get Voodoo up to 8 MB.

Schematic PCB

Slide block for light-curing 3D printer

Schematic PCB

A LabVIEW vending machine example, source code

Schematic PCB