C1=1000P, R1=10K determines the center frequency. R3=160 ohm, C2=0.1U in the low-pass filter. Pins 3 and 4 are short-circuited, which may not be clearly drawn in the diagram. Now input a signal of abo
The image format captured from the dopoda S1 camera is RGB565 120*160 (obtained from DirectShow Filter). Before H.263 encoding, it must be converted to YUV format. The available formats of QCIF are fi
I built the typical circuit in the datasheet, with a 3.6V input voltage regulator and a 16 ohm load, and the output is only 3.0V. The capacitors used are ceramic chip capacitors. The two 2.2uf are in
Raw-OS (www.raw-os.com) took off in 2012. Raw-OS aims to create a Chinese-owned, open-source, free real-time operating system. Raw-OS philosophy: stable, efficient, portable, open-source. We hope that
I would like to ask if I should set TCCR1B to zero to stop timer 1? Is it OK to set TCCR1A to zero? Why do the two effects look the same when I try it on the experiment board?